i-PRO

i-PRO

SKU: MC-COM400L-626

i-PRO COM400L 626- AD-400 Wireless - MC-COM400L-626

• 900 MHz wireless eliminates conduit runs, enabling access control at hard-to-wire locations.
• ANSI/BHMA Grade 1 rated with NDAA compliance meets enterprise security and procurement standards.
• Field-reversible handing and AA battery power simplify retrofit installs without panel wiring.

i-PRO

SKU: MC-9420

i-PRO Credintial: 9420 Schlage Mifare Classic Smart - MC-9420

• Factory-programmed Mifare Classic 1K at 13.56 MHz eliminates field encoding on deployment.
• ISO card form factor drops into existing badge holder stock without hardware changes.
• NDAA-compliant credential integrates with Schlage AD-400, NDE, and HID reader platforms.

i-PRO

SKU: MX-O-SMA-TS-R079

i-PRO MX-O-SMA-TS-R079 Thermal Sensor for S16 with 45 Degree FOV

• VOx microbolometer enables reliable detection in low-light and obscured conditions.
• 45° FOV suits medium-range perimeter monitoring with useful area coverage per module.
• Field-swappable into S16 body—no cable pulls or camera replacement required.

i-PRO

SKU: MC-7610

i-PRO Credintial: 7610 Proximity Keyfob (minimum Order - MC-7610

• 125 kHz passive RFID needs no batteries, eliminating credential maintenance overhead.
• Compatible with Schlage AD-400/NDE and HID readers for broad ecosystem deployment.
• NDAA-compliant keyfob suits bulk credentialing of contractors and shift workers.

i-PRO

SKU: MC-UPG-A-900

i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-900

• Converts R10/RP10 readers to iCLASS SE/Multiclass without rewiring or panel changes.
• Supports 13.56 MHz smart card and 125 kHz prox in one reader for mixed-credential sites.
• NDAA-compliant field upgrade rated –30°C to +65°C with Wiegand, RS-485, and OSDP output.

i-PRO

SKU: MC-75-B100C4D8PE

i-PRO Powersupply: - MC-75-B100C4D8PE

• 75 W FPO75-class output supports small door counts without over-provisioning space.
• Selectable 12/24 VDC output and SLA battery charging simplify multi-door deployments.
• Individually fused channels plus AC-fail and tamper outputs enable panel-level monitoring.

i-PRO

SKU: MC-T3MK77F16SMC

i-PRO Altronix T3MK77F16 KIT Consists OF - MC-T3MK77F16SMC

• Single SKU bundles Altronix power and mounting components for T3MK77F16 deployments.
• Pre-matched components eliminate compatibility risk across multi-camera i-PRO installations.
• Reduces procurement cycles and on-site delays by consolidating verified component sets.

i-PRO

SKU: MC-5365-EKP00

i-PRO MP Wieg Classic BLK 18IN Pigtail Rohs Prox - MC-5365-EKP00

• 125 kHz proximity reads standard prox cards and fobs at 2–4 inch range.
• 26-bit Wiegand output integrates with virtually any access control panel.
• 18-inch pigtail and mullion-mount form factor speed rough-in on narrow frames.

i-PRO

SKU: MC-PIM400-1501-LC

i-PRO PIM400-1501-LC Panel Interface Module - MC-PIM400-1501-LC

• Extends I/O capacity for door hardware, sensors, and readers without new cable runs.
• Integrates legacy wired readers into i-PRO IP-based access control for unified management.
• Compact form factor fits space-constrained equipment closets and door frame enclosures.

i-PRO

SKU: MC-150/250-3D8P2-1

i-PRO Powersupply: - MC-150/250-3D8P2-1

• Eight individually fused 12V DC/24V AC outputs consolidate power for up to 8 devices.
• 250W capacity at 10A supports full i-PRO MC-150/250 series deployments from one unit.
• Enclosed cabinet form factor rack-mounts cleanly alongside switches and NVRs in IDFs.

i-PRO

SKU: MC-BL3

i-PRO Altronix BL3 Battery Leads 18 Inch 18AWG Pair RED - MC-BL3

• Pre-terminated 18-inch leads eliminate field stripping and reduce wiring errors.
• 18AWG conductors handle current demands of 12V/24V sealed lead-acid batteries.
• Red jacket enables instant polarity identification during install and maintenance.

i-PRO

SKU: MC-150-B100C8D8-1

i-PRO Powersupply: FPO150-B100C8D8PE6M 150W - MC-150-B100C8D8-1

• 150W continuous output supports PTZ motors and multi-camera loads without voltage sag.
• Over-current and short-circuit protection prevents downstream equipment damage on faults.
• Compact form factor integrates cleanly into equipment closets, racks, or enclosures.

i-PRO

SKU: MC-921PTNNEK00000

I-Pro Rdr RPK40 Multiclass Se Rev E Kpd Std - MC-921PTNNEK00000

• Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
• Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
• Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.

i-PRO

SKU: WVQ204/2S

i-PRO Mounting Bracket for WJ-GXE500 & WJ-GXD400 (2 - WVQ204/2S

i-PRO

SKU: IPS-SRV-UDE-12TB-A

I-pro UDE Hybrid Server/storagefor T3 - IPS-SRV-UDE-12TB-A

• Pre-loaded UDE stack unifies body-worn, in-car, and fixed-camera ingest on one chassis.
• 12 TB hybrid storage supports Tier 3 retention with chain-of-custody and audit logging built in.
• Cybersecurity-hardened image and H.265 hardware decode suit agency network deployment requirements.

i-PRO

SKU: MC-75-D8PE4M-1

i-PRO FPO75-D8PE4M ; 1 X FPO75 75W Total Output - MC-75-D8PE4M-1

• 75 W output right-sizes power for small door counts without over-provisioning.
• Selectable 12/24 VDC output with individually fused channels protects each device.
• Battery-charging circuit and AC-fail output support monitored, backed-up operation.

i-PRO

SKU: IPS-LIS-1-4TB

I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB

• 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
• Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
• Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.

i-PRO

SKU: WVLZA61/2S

i-PRO WVLZA61/2S 1/3 Varifocal Zoom Lens

• Varifocal zoom eliminates fixed-lens swaps, cutting commissioning time on multi-zone sites.
• Matched to 1/3-inch CCD at 768×494 NTSC for aberration-free imaging across the full zoom range.
• Rated –10 °C to +50 °C with IR/Day-Night support for continuous dusk-to-dawn operation.

i-PRO

SKU: MC-7410

I-Pro Credential: 7410 Proximity Card Clamshell - MC-7410

• 125 kHz proximity technology ensures compatibility with legacy and current readers.
• Clamshell form factor resists bending and antenna breaks in high-wear deployments.
• Slot-punch ready design supports lanyard or badge reel attachment out of the box.

i-PRO

SKU: IPS-CLR-SYNC-1Y

i-PRO Automatically Generate Cases IN - IPS-CLR-SYNC-1Y

• Automates case file assembly from alarm and analytics triggers across i-PRO networks.
• One-year subscription delivers continuous evidence sync and chain-of-custody tracking.
• Consolidates clips, metadata, and timestamps from multi-site cameras into export-ready packages.