Camera Housings
Showing Results for Camera Housings
-
Pelco
SKU: WAS0V5L5M00
Pelco WAS0V5L5M00 Camera Lens Wash System
Automated lens wash system for surveillance cameras in harsh environments
- 5-liter tank with 5-meter pump cable removes dirt, dust, salt spray, insects
- Multi-voltage input (120/230 Vac, 24 Vac) mounts adjacent to camera housing
- IP66-rated white housing for coastal and industrial outdoor deployments
$504.25 $360.99 Save $143.26The item has been added -
Pelco
SKU: WAS1V23L30M00
Pelco WAS1V23L30M00 Wash System 23L 30m 230V
23L wash system with 30m hose for 230V camera housing installations
- 23-liter tank capacity with 30-meter supply hose for distant camera placement
- Integrated pump and automatic float valve for continuous water refill operation
- 230 Vac single-phase power rated for European and international electrical standards
$1,544.77 $1,103.99 Save $440.78The item has been added -
Pelco
SKU: WAS3V23L30M00
Pelco WAS3V23L30M00 Camera Wash System 23L
23L wash system with 30m hose for remote camera lens cleaning
- 23-liter tank capacity supports extended cleaning cycles on distant sites
- 30-meter supply hose reaches cameras positioned far from tank location
- Integrated float valve and wash pump maintain consistent spray pressure
$1,544.77 $1,103.99 Save $440.78The item has been added -
Pelco
SKU: WASCAB
Pelco WASCAB Stainless Steel Washer Tank Cabinet
Stainless steel washer tank cabinet for Pelco WAS/WASPT systems
- Stainless steel construction resists corrosion in outdoor installations
- Fits both 5-meter and 11-meter hose length configurations
- Weatherproof and vandal-resistant design protects tank equipment
$1,249.96 $892.99 Save $356.97The item has been added -
Pelco
SKU: WASEX2T4AT
Pelco WASEX2T4AT ExSite Pro Washer 10L ATEX
Automated lens washer for ATEX explosion-proof cameras, 10L tank
- 10-liter tank with 20-meter hose for continuous optical clarity
- ATEX Zone 1 & Zone 2 certified for hazardous gas/dust environments
- 24 Vac/Vdc powered system integrates with ExSite Pro housings
$2,226.00 $1,590.99 Save $635.01The item has been added -
Pelco
SKU: WASEX2T4ATPR
Pelco WASEX2T4ATPR ExSite Pro ATEX Washer with Pump
Automated lens washer for ATEX explosion-proof cameras in hazardous zones
- 10-liter fluid capacity with 20-meter delivery pipe for extended cleaning cycles
- 24 Vac/Vdc pump with local switch plus remote VMS command control
- ATEX Zone 1 and Zone 2 certified for oil, gas, and chemical facilities
$3,332.33 $2,380.99 Save $951.34The item has been added -
Pelco
SKU: WASEX2T4IN
Pelco WASEX2T4IN ExSite Pro Washer 10L
Automated lens washer for ExSite Pro explosion-proof housings in harsh environments
- 10-liter tank with 20-meter hose for continuous cleaning in dusty and corrosive conditions
- 24 Vac/Vdc power input supports flexible installation across industrial sites
- INMETRO and NDAA Section 889 certified for regulated and government deployments
$2,226.00 $1,590.99 Save $635.01The item has been added -
Pelco
SKU: WASEX2T4UL
Pelco WASEX2T4UL ExSite Pro Washer 10L Hazardous Location
10L automated washer for ExSite Pro cameras in Class I/II/III hazardous areas
- 10-liter tank with 20-meter hose for extended operation and flexible placement
- cULus certified for Class I/II/III Division I hazardous location compliance
- 24 Vac/Vdc powered lens cleaning system for ExSite Pro explosion-proof housings
$2,500.00 $1,785.99 Save $714.01The item has been added -
Pelco
SKU: WASNX1V10L20M00
Pelco WASNX1V10L20M00 NX Washer 10L 230Vac
10L washer for Pelco NX housings, 30m hose, 230Vac solenoid pump
- 10-liter tank with 30-meter supply hose for ground-level reservoir placement
- Solenoid valve and manual pump control for optical clarity in harsh environments
- IP65 rated, designed for Pelco NX stainless steel camera housings with wipers
$1,962.72 $1,401.99 Save $560.73The item has been added -
Pelco
SKU: WASNX2V10L20M00
Pelco WASNX2V10L20M00 NX Series Camera Washer
10L washer system for NX stainless housings with 30m supply hose
- 10-liter tank capacity with 30-meter hose for pole-mount installations
- 24 Vac solenoid valve with manual pump for controlled lens cleaning
- IP65-rated for coastal and high-contamination outdoor environments
$1,962.72 $1,401.99 Save $560.73The item has been added -
Pelco
SKU: WASNX3V10L20M00
Pelco WASNX3V10L20M00 NX Camera Washer System
Automated lens washer for NX stainless housings in salt-spray environments
- 10-liter capacity with 30-meter hose for extended operation and flexible placement
- Solenoid valve and manual pump for controlled on-demand washing cycles
- 120 Vac powered; compatible with NX wiper/washer nozzle assemblies
$1,962.72 $1,401.99 Save $560.73The item has been added -
Add to Cart The item has been addedPelco
SKU: WBLA
Pelco WBLA Ball Joint Wall Bracket for Camera Housings
Surface-mount wall bracket with ball joint for Pelco camera housings
- Integrated ball joint allows angular aiming adjustments post-installation
- Rigid metal construction supports secure mounting on solid surfaces
- Eliminates need to reposition anchors for camera fine-tuning
In stock · Ships same business day$795.06 $567.99 Save $227.07The item has been added -
Pelco
SKU: WCWGC
Pelco WCWGC Corner Mount Adapter Large Housing
Heavy-duty 90-degree corner mount adapter for Pelco camera systems
- Converts flat-surface brackets to corner configuration for dual-wall coverage
- Large housing variant supports heavier camera assemblies and housings
- NDAA Section 889 compliant for government and secure deployments
$106.05 $105.99 Save $0.06The item has been added -
Pelco
SKU: WEXTUB30
Pelco WEXTUB30 Antistatic Water Pipe Extension 30m
30m antistatic water extension for Pelco camera housing washers
- 30-meter length routes pressurized water to remote lens cleaning nozzles
- Antistatic construction prevents static buildup near sensitive electronics
- Joinable design extends beyond 30m when paired with additional sections
$260.13 $185.99 Save $74.14The item has been added -
Pelco
SKU: WFWCA
Pelco WFWCA Column Mount Ball Joint Camera Housing
Column clamp with ball joint for post-install camera aiming
- IP66 sealed housing resists rain, dust, and washdown spray
- Ball joint allows horizontal and vertical aim without unbolting
- Secures to poles and columns; eliminates wall anchors or brackets
$109.12 $108.99 Save $0.13The item has been added -
![PioneerPOS CT18 Back Housing Pocket Set [P]ioneer](https://cdn11.bigcommerce.com/s-j1idkp65fd/images/stencil/300x300/products/45868/341198/product-45868-2JW-BH-SETV3-restore0__21005.1778855352.jpg?c=2 "PioneerPOS CT18 Back Housing Pocket Set [P]ioneer")
PioneerPOS
SKU: 2JW-BH-SETV3
PioneerPOS CT18 Back Housing Pocket Set [P]ioneer - 2JW-BH-SETV3
- OEM back housing set restores CT18 enclosure integrity with zero fitment ambiguity.
- Designed exclusively for BayTrail-based CT18 terminals—confirm architecture before ordering.
- Complete pocket-and-clip set in white enables same-day housing repair, minimizing downtime.
$197.91 $196.99 Save $0.92The item has been added
Camera Housings
Camera housings provide environmental protection for surveillance devices installed in outdoor or demanding conditions. Proper enclosure selection protects against weather exposure, temperature extremes, dust, and physical impact to maintain long-term system performance.
Plan Your Deployment
- Environmental exposure and weather rating requirements
- Operating temperature range considerations
- IP and impact protection standards
- Camera size and mounting compatibility
- Maintenance access and cable management planning
Camera Housings — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 176 working models of camera housings sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 0MP, 2MP, 8MP |
| IP Rating | IP66, IP68 |
| Connectivity | Wired |
| Power | PoE+, PoE, AC/DC |
| Type | Accessory, Box, Cable, Dome, IP Camera, Camera Housing |
| Durability | Vandal Resistant |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.