Electrical & Power
Electrical and power components provide the foundation for reliable surveillance and access control system operation. Proper power delivery, distribution, and protection planning ensures stable performance and reduces system downtime in commercial environments.
Plan Your Deployment
- Voltage requirements and device compatibility
- Power budgeting across cameras and access devices
- Centralized vs distributed power design
- Surge protection and environmental safeguards
- Redundancy and uptime planning
Sub categories
Adapter Boxes & Plates
13 items
Conduit Adapters
15 items
Conduit Bases, Boxes, & Covers
21 items
Converter Plates
1 item
Electrical Boxes & Enclosures
223 items
Gang Plates
12 items
Installation Boxes
2 items
Junction Boxes
45 items
Power Supplies
1245 items
Showing Results for Electrical & Power
-
Lifesafety Power
SKU: FPO150/250-2C8P3D8PE8M2/P16-A
Lifesafety Power FPO150/250-2C8P3D8PE8M2/P16-A 16DR E8M2 400W 16
- 400W capacity powers 16 independently protected channels at 12V and 24V.
- Dual-voltage rails (12V/12A, 24V/10A) support mixed legacy and modern loads.
- Per-channel overcurrent protection isolates faults without taking down other circuits.
$4,387.00 $3,151.99 Save $1,235.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P3D8PE8M2/P16-C
Lifesafety Power FPO150/250-2C8P3D8PE8M2/P16-C 150W power supply
- Dual-voltage output (12VDC/12A or 24VDC/6A) eliminates separate supply SKUs in mixed deployments.
- 16 discrete outputs (eight 12V, eight 24V) distribute power across cameras, readers, and locks.
- AC 110–240V universal input accepts any site mains standard without an external transformer.
$4,387.00 $3,151.99 Save $1,235.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P3D8PE8S
Lifesafety Power FPO150/250-2C8P3D8PE8S 150W power supply 12A/12
- Selectable 12VDC/24VDC output delivers 20A or 10A to match your lock load requirements.
- Two independent relay outputs support per-door failsafe or failsecure config without external relays.
- Three 2.5A auxiliary outputs power readers, REX buttons, or sensors directly from the same module.
$2,485.00 $1,785.99 Save $699.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE4
Lifesafety Power FPO150/250-2D82M8NLCE4 150W power supply 12A/12
- Selectable 150W/250W capacity supports 12VDC or 24VDC mixed-voltage load deployments.
- Eight independently fused 3A outputs prevent cascading failures across cameras and readers.
- Field-selectable Bus1/Bus2 per output enables N+1 or parallel redundancy in one enclosure.
$1,936.00 $1,390.99 Save $545.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE8M
Lifesafety Power FPO150/250-2D82M8NLCE8M 150W power supply 12A/1
- Dual-mode output scales from 150W (12A/12V) to 250W (20A/12V) as load grows.
- Eight independently fused 3A DC outputs support per-circuit protection across readers and locks.
- Bus1/Bus2 selectable routing on each output enables modular multi-door system design.
$2,958.00 $2,125.99 Save $832.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE8M2
Lifesafety Power FPO150/250-2D82M8NLCE8M2 150W power supply 12A
- Dual-bus 12VDC/24VDC distribution isolates faults per output, preventing cascade failures.
- Eight independently fused 3A outputs let you assign and isolate circuits across two voltage rails.
- Scales from 150W (12A) to 250W (20A) at 12V to match growing camera or reader endpoint loads.
$3,149.00 $2,262.99 Save $886.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE8S
Lifesafety Power FPO150/250-2D82M8NLCE8S 150W power supply 12A/1
- Dual-bus architecture with 8 individually fused 3A outputs prevents single-endpoint failures from cascading.
- Scales from 150W to 250W and supports both 12VDC and 24VDC to match existing infrastructure.
- E8 enclosure (36H×30W×6.5D in.) fits standard 19-inch racks or wall-mount equipment rooms.
$3,026.00 $2,173.99 Save $852.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE4M1
Lifesafety Power FPO150/250-2D8P2M8NLCE4M1 150W power supply 12A
- Dual-bus architecture isolates faults so a failed circuit doesn't drop remaining outputs.
- Eight class-2 auxiliary outputs at 2.5A each support cameras, readers, and locks independently.
- Scales from 150W/12A to 250W/20A at 12V to match site load growth without chassis swap.
$2,266.00 $1,627.99 Save $638.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE6M1
Lifesafety Power FPO150/250-2D8P2M8NLCE6M1 150W power supply 12A
- Field-selectable 150W or 250W output supports 12VDC and 24VDC endpoints from one unit.
- Eight 3A fused outputs assign independently to Bus 1 or Bus 2, reducing single-point failure.
- Eight class 2 aux outputs at 2.5A each support mixed loads: cameras, relays, and intercoms.
$2,636.00 $1,893.99 Save $742.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE8M
Lifesafety Power FPO150/250-2D8P2M8NLCE8M 150W power supply 12A
- Selectable 150W or 250W mode lets you right-size capacity at commissioning without field mods.
- Eight independently fused 3A class 2 outputs prevent a single device fault from cascading to others.
- Bus 1/Bus 2 assignment distributes auxiliary loads across two circuits, reducing single-point-of-failure risk.
$2,958.00 $2,125.99 Save $832.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE8M1
Lifesafety Power FPO150/250-2D8P2M8NLCE8M1 150W power supply 12A
- Eight individually fused 2.5A outputs isolate faults without disrupting the full system.
- Dual-bus architecture lets you segregate cameras, readers, and auxiliaries on one supply.
- Switchable 150W or 250W capacity supports 12VDC or 24VDC per output to match device needs.
$3,217.00 $2,311.99 Save $905.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE8M2/P
Lifesafety Power FPO150/250-2D8P2M8NLCE8M2/P 150W power supply
- Dual-capacity design supports 150W or 250W to scale with site power demands.
- 8 individually fused auxiliary outputs simplify multi-door access control wiring.
- Class 2 power-limited outputs reduce code compliance burden on each circuit.
$3,439.00 $2,470.99 Save $968.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE8N
Lifesafety Power FPO150/250-2D8P2M8NLCE8N 150W power supply 12A
- Switchable 150W/250W rating adapts to deployment size without swapping chassis.
- Dual voltage rails (12V and 24V) eliminate a second PSU, saving BOM and cabinet space.
- Eight individually fused 3A Class 2 outputs isolate critical loads across two buses.
$3,205.00 $2,302.99 Save $902.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8PNLCE8M2
Lifesafety Power FPO150/250-2D8P2M8PNLCE8M2 150W power supply
- Dual-voltage output (12V or 24V) scales from 150W/12A to 250W/20A per design need.
- Eight Class 2 outputs at 2.5A each isolate camera and reader branches to limit fault spread.
- Per-output Bus1/Bus2 selectability enables independent supervision across load-balanced circuits.
$3,149.00 $2,262.99 Save $886.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8PE8S
Lifesafety Power FPO150/250-2D8PE8S Dual voltage power supply-bat
- Dual independent FPO supplies each configurable for 12VDC or 24VDC in one cabinet.
- 16 selectable auxiliary DC outputs support load balancing across both supplies.
- Integral battery space and tamper switch maintain power and supervision during AC loss.
$2,251.00 $1,617.99 Save $633.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2M8NLCSD16E8M2
Lifesafety Power FPO150/250-2M8NLCSD16E8M2 150W power supply 12A
- 8 individually fused 3A outputs isolate faults per device, preventing system-wide outages.
- Dual-supply topology delivers up to 20A @ 12VDC or 10A @ 24VDC on the 250W configuration.
- E8 enclosure (36H×30W×6.5D in.) supports rack or wall mount for dense multi-endpoint wiring.
$3,452.00 $2,479.99 Save $972.01The item has been added