Camden

SKU: CM-RX-90

Camden V2 Kinetic/Lazerpoint Advanced 1 Relay Receiver - CM-RX-90

• 915 MHz RF cuts through walls and metal studs with less multipath interference.
• Stores up to 40 mixed Lazerpoint and Kinetic transmitter codes in one receiver.
• Form C relay supports 12/24V AC/DC loads with 1–15 s delay, momentary, or latch mode.

Camden

SKU: CM-221M/46

Camden ValueWave™ SS 1 Gg faceplate 12/24VDC 1 - CM-221M/46

• Adjustable 2–8 in sensing range and 0.5–20 s time delay tune to any traffic flow.
• Relay contacts (1A @ 30VDC, C/NO/NC) interface directly with standard access control panels.
• IP65-rated stainless steel housing withstands washdown in food service or clinical settings.

Camden

SKU: CM-221M/46N

Camden ValueWave™ SS Narrow faceplate 12/24VDC 1 - CM-221M/46N

• Active IR microburst sensor enables hands-free exit triggering without physical contact.
• Dry-contact N.O./N.C. relay (1A @ 30VDC) integrates with strikes, operators, and panels.
• Narrow 4.5"×1.75" jamb-mount profile fits tight frames where single-gang boxes won't seat.

Camden

SKU: CM-221/A42N

Camden ValueWave™ Touchless Switch Narrow (Jamb) - CM-221/A42N

• IP65-rated enclosure withstands dust, rain, and washdown without degradation.
• Form C relay (NO/NC/COM, 1A) integrates directly with EM locks and access relays.
• Sensor range adjusts 2–8 in. and time delay spans 0.5–20 sec for site tuning.

Camden

SKU: CM-CPC1

Camden Vandal and weather resistant clear lift cover

Clear lift cover for outdoor keypad readers with vandal protection

• Transparent design maintains keypad visibility while blocking weather and impact
• Wall-mounted TCP/IP keypad cover compatible with HID credential systems
• Outdoor-rated construction protects access points in high-traffic entry areas

Camden

SKU: CM-CPC1-F

Camden Vandal and weather resistant clear lift cover - CM-CPC1-F

• Polycarbonate lift cover shields outdoor keypads from rain, dust, and impact.
• Outdoor-rated enclosure suits unsheltered perimeter and wall-mount flush installations.
• Hinged design allows quick field maintenance without full disassembly; 3-year warranty.

Camden

SKU: CM-8010R/13

Camden Vandal Resistant 1\" Red Push Button Single - CM-8010R/13

• Aluminum NEMA-rated enclosure resists impact and vandalism in high-traffic institutional areas.
• 24VDC N/C contact integrates directly with access control panels and electronic strike circuits.
• Single-gang wall-mount fits standard electrical boxes for flush installation at desks or counters.

Camden

SKU: CM-324

Camden Wired Touchless Switch economical 1 Relay no - CM-324

• Onboard Form C relay (5A @ 30 VDC) drives strikes and solenoids directly—no add-on modules.
• Adjustable 1–26" sensing range with 100 ms response minimizes nuisance triggers at each door.
• Runs on 12–24 VDC across −4°F to +153°F, suiting retrofit and new-build commercial installs.

Camden

SKU: CM-331

Camden Wired Touchless switch w/ built-in door control - CM-331

• Built-in Form C relay (3A @ 30VDC) controls up to 3 doors without external modules.
• Line-powered 12–24 VAC/DC operation eliminates battery replacement and legacy 30VDC issues.
• IR sensing detects motion from 1–28 in. standard, up to 72 in. in auto-range mode.

Camden

SKU: CM-332

Camden Wired Touchless Switch, w/ built-in door control, 2 Relays, ...

Wired touchless switch with built-in logic for up to 3 doors

• Two relay outputs control strikes and latches across multiple entry points
• 30VDC operation with touchless activation—no contact required
• Wall, pendant, or recessed mount options for flexible installation

Camden

SKU: CX-ESF-4

Camden Wood Frame Face Plate for CX-ED1309 brushed - CX-ESF-4

• Brushed aluminum trim conceals mounting gaps on wood frame CX-ED1309 installations.
• Direct compatibility with CX-ED1309 strike requires no wiring or power supply changes.
• Flat-mount design aligns to existing strike holes, minimizing rework during finishing.

Camden

SKU: CX-ESF-4BZ

Camden Wood Frame Face Plate for CX-ED1309 dark - CX-ESF-4BZ

• Dark bronze factory finish matches CX-ED1309 hardware for a consistent door trim spec.
• Designed exclusively for CX-ED1309 magnetic lock; not compatible with CX-91S or CX-92S.
• Covers strike mounting edges on wood frames, reducing moisture ingress risk at the frame.

Camden

SKU: CM-PT250-12

Camden Zamac endcaps, 12” length (Formerly CM-PTS14)

12" zamac endcaps for access control door hardware installations

• Zamac construction resists corrosion in standard indoor environments
• 12-inch length fits standard door opening frame assemblies
• Includes mounting screws, anchor plugs, and cable connectors

Code Blue

SKU: 40087

Code Blue 40087 LED Beacon Strobe Light Blocker

• Up to 375 flashes/min cuts through high-noise environments for instant breach recognition.
• IP56 + -40°F to +158°F range enables outdoor pole or unheated warehouse mounting without weatherproofing.
• Cabinet, pole, and wall mount compatibility at 2.2 lbs requires no structural reinforcement.

Code Blue

SKU: 40117

Code Blue 40117 S-1000 LED Combo Strobe Light Retro

PoE-powered LED strobe light with IP56 weather protection for outdoor alerts

• IP56-rated design withstands dust and water in continuous outdoor deployments
• PoE (802.3af) power eliminates dedicated electrical runs for simpler installation
• Integrates directly with PoE switches and IP-based security system infrastructure

Code Blue

SKU: 40197

Code Blue 40197 S-50 Strobe Light Assembly

PoE strobe light assembly for outdoor security and emergency signaling

• IP56-rated weatherproofing handles dust and water exposure in outdoor installations
• 802.3af PoE power eliminates separate power runs for simplified deployment
• 20MP+ sensor resolution captures high-detail documentation for security events