Lifesafety Power

SKU: FPO150-B100C82D8PE4M1/T8-C

Lifesafety Power FPO150-B100C82D8PE4M1/T8-C 8DR E4M 150W 4A/12V

• 150W supply delivers 4A at 12V, powering up to 8 simultaneous lock solenoids.
• Factory pre-wired 8-door relay outputs reduce installation time in multi-door deployments.
• Switchable 12V/24V output supports both fail-safe and fail-secure lock circuit types.

Lifesafety Power

SKU: FPO150-B100C82D8PE6H/T8-C

Lifesafety Power FPO150-B100C82D8PE6H/T8-C 150W power supply 12A

• Delivers 12A at 12VDC or 6A at 24VDC to power multiple locks and readers.
• Eight relay outputs (3A each) offer per-channel failsafe or failsecure selection.
• Eight Class 2 auxiliary outputs (2.5A each) assign to Bus1 or Bus2 independently.

Lifesafety Power

SKU: FPO150-B100C82D8PE6M/P8-A

Lifesafety Power FPO150-B100C82D8PE6M/P8-A 150W power supply 12A

• Delivers 12A@12VDC or 6A@24VDC primary to power cameras, readers, and strikes in one zone.
• 16 class-2 auxiliary outputs at 2.5A each, assignable to Bus1 or Bus2 for circuit isolation.
• Four relay outputs support failsafe, failsecure, or FAI logic for compliant door control.

Lifesafety Power

SKU: FPO150-B100C82D8PE6M/T8-A

Lifesafety Power FPO150-B100C82D8PE6M/T8-A 8DR E6M 150W 4A/12V&4A

Lifesafety Power

SKU: FPO150-B100C82D8PE8H/P8-C

Lifesafety Power FPO150-B100C82D8PE8H/P8-C 150W power supply 12A

• Delivers 150W at 12A (12V) or 6A (24V) with adjustable 5–18V secondary at 4A.

Lifesafety Power

SKU: FPO150-B100C8D8E2M

Lifesafety Power FPO150-B100C8D8E2M Power supply board 150W 12A

• Delivers 12VDC @ 12A or 24VDC @ 6A to match legacy and modern endpoint requirements.
• Board-only form factor integrates directly into custom chassis or existing backplane infrastructure.
• 150W capacity supports mid-scale camera and access control arrays without a centralized supply.

Lifesafety Power

SKU: FPO150-B100C8D8E4-4DM2

Lifesafety Power FPO150-B100C8D8E4-4DM2 150W (12V & 24V) 8 lock/8

• Delivers simultaneous 12V and 24V outputs across eight auxiliary ports in one unit.
• 150W modular frame supports up to eight plug-in modules for field-customized deployments.
• Mounts in standard 19-inch racks or wall cabinets; runs on 120VAC commercial power.

Lifesafety Power

SKU: FPO150-B100C8D8E4S

Lifesafety Power FPO150-B100C8D8E4S 150W power supply 12A/12V

• Delivers 12A at 12VDC or 6A at 24VDC from a single 150W supervised supply.
• Eight independently 3A-fused relay outputs support fail-safe or fail-secure selection per door.
• Eight DC auxiliary outputs with dual-bus support isolate faults across distributed access points.

Lifesafety Power

SKU: FPO150-B100C8D8E4X

Lifesafety Power FPO150-B100C8D8E4X 150W power supply 12A/12V

• Delivers 12A at 12VDC or 6A at 24VDC, configurable for mixed-voltage door deployments.
• 8 individually fused 3A relay outputs support per-output failsafe, failsecure, or FAI modes.
• 8 DC auxiliary outputs on dual selectable buses isolate load domains to contain fault impact.

Lifesafety Power

SKU: FPO150-B100C8D8E8H

Lifesafety Power FPO150-B100C8D8E8H Power supply board 150W 12A

• Selectable 12V/24V output supports mixed-generation devices from a single board.
• 150W capacity delivers 12A at 12VDC or 6A at 24VDC for multi-channel loads.
• Board-level form factor integrates into existing DIN-rail or panel-mount architectures.

Lifesafety Power

SKU: FPO150-B100C8D8NLCE4-4SL1

Lifesafety Power FPO150-B100C8D8NLCE4-4SL1 150W power supply 12A

• Selectable 12VDC/12A or 24VDC/6A output supports mixed-voltage access control deployments.
• Eight relay outputs fused at 3A each with per-output failsafe or failsecure logic selection.
• Eight auxiliary DC outputs assignable to Bus1 or Bus2 eliminate single points of failure.

Lifesafety Power

SKU: FPO150-B100C8D8PE4M/P8-A

Lifesafety Power FPO150-B100C8D8PE4M/P8-A 150W power supply 12A

• Delivers 12A @ 12VDC or 6A @ 24VDC to power mag locks and readers from one unit.
• Eight relay outputs are field-selectable per channel for failsafe, failsecure, or FAI.
• Eight Class 2 aux outputs across two switchable buses add supervision without relay load.

Lifesafety Power

SKU: FPO150-B100C8D8PE4M/T8-C

Lifesafety Power FPO150-B100C8D8PE4M/T8-C 150W power supply 12A

• Delivers 12A at 12VDC or 6A at 24VDC to match lock hardware and cable-run requirements.
• Eight relay outputs, each 3A fused, with per-relay failsafe or failsecure mode independently set.
• Eight auxiliary Class 2 DC outputs at 2.5A each handle secondary loads on the same panel.

Lifesafety Power

SKU: FPO150-B100C8D8PE4M1/T8-A

Lifesafety Power FPO150-B100C8D8PE4M1/T8-A 150W power supply 12A

• Switchable 12VDC/12A or 24VDC/6A output replaces two SKUs on mixed-voltage sites.
• Eight individually fused 2.5A DC outputs support zone-segregated readers and controllers.
• Eight relay outputs configurable per-channel for failsafe, failsecure, or FAI mode.

Lifesafety Power

SKU: FPO150-B100C8D8PE6H/P8-C

Lifesafety Power FPO150-B100C8D8PE6H/P8-C 150W power supply 12A

• Delivers 12A at 12VDC or 6A at 24VDC from a single 150W transformer.
• 8 relay outputs, each fused at 3A with per-output failsafe or failsecure selection.
• Adjustable 5–18VDC secondary at 4A integrates mixed-voltage sensors without extra modules.

Lifesafety Power

SKU: FPO150-B100C8D8PE6H/T8-C

Lifesafety Power FPO150-B100C8D8PE6H/T8-C 150W power supply 12A

• Delivers 150W at 12V/12A or 24V/6A to power locks and cameras from one unit.
• Eight 2.5A DC outputs and eight 3A relay outputs support independent circuit loads.
• Per-output Bus 1/Bus 2 selection isolates egress circuits without external relays.