Hanwha TNP-XC6403EPT3-Z Overview
The Hanwha TNP-XC6403EPT3-Z is a purpose-built explosion proof PTZ camera engineered for critical infrastructure environments where traditional surveillance equipment poses safety risks. Deployed in oil & gas, chemical processing, mining, and maritime operations, this 2MP platform combines AI-driven analytics with flameproof housing certification to deliver pan, tilt, zoom, and auto-tracking capability in hazardous locations without compromising personnel safety or operational continuity.
Hanwha TNP-XC6403EPT3-Z Key Features
- 2MP resolution at 60fps: Delivers crisp detail capture at 1920×1080 resolution with maximum 60 frame-per-second throughput using the XNP-C6403 sensor, supporting fluid PTZ motion and real-time analytics without dropped frames in volatile environments.
- 40x optical zoom with 32x digital zoom: 4.25–170mm motorized lens enables seamless magnification from wide-area monitoring to object-level identification without resolution loss, critical for safely surveying expansive hazardous zones from control locations.
- AI object detection and auto-tracking: Intelligent analytics engine identifies and tracks people, vehicles, and faces in real-time; auto-tracking locks on targets even during low-light conditions or complex industrial settings, reducing false alarms and minimizing manual pan-tilt overhead.
- Triple codec support (H.265, H.264, MJPEG) with WiseStream II: Flexible compression options enable bandwidth optimization across network tiers while maintaining frame fidelity; WiseStream II intelligent bandwidth management reduces storage load without sacrificing image quality in critical frames.
- PoE+ power delivery (802.3at) with no wiper: Single-cable Ethernet deployment eliminates auxiliary power runs and mechanical wiper maintenance in sealed flameproof housings, reducing installation complexity and operational lifecycle costs in remote or confined hazardous areas.
- IP66/IK10 weatherproofing: Full dust ingress protection and vandal-resistant reinforcement withstand washdown and mechanical stress in offshore platforms, refineries, and processing plants where moisture and corrosive atmospheres are constant threats.
- FM and ATEX explosion proof certification: Factory Mutual (FM17US0156x, FM18CA0103x) and ATEX approvals confirm compliance with Class I Division 1 Groups B, C, D (T6); Class II/III Division 1 Groups E, F, G (T6); and Zone 1 AEx/Ex db IIB+H2 (T6 Gb) and Zone 21 AEx/Ex tb IIIC (T85°C Db) standards, enabling legal and safe deployment in European and North American hazardous locations.
- IECEx, UKCA, and INMETRO certification: Multilateral explosion-proof approvals ensure global deployment flexibility across regulated oil & gas, chemical, and mining jurisdictions without reclassification or additional third-party testing.
- Extended operating temperature range (-20°C to +55°C): Sealed flameproof enclosure maintains optical performance and sensor stability from Arctic offshore operations to desert-based chemical processing, without thermal conditioning burden.
- PTZ PLUS compact design: Lightweight, simplified cabling architecture reduces structural loading on hazardous-area-rated mounting systems and minimizes installation labor in confined spaces where engineering approvals limit device mass and footprint.
- Robust rules engine for event triggering: Configurable logic chains correlate AI detections to alarm outputs, system integrations, and audit trails, enabling predictive response workflows in safety-critical environments.
Hanwha TNP-XC6403EPT3-Z Standards & Compliance
This unit meets the complete IECEx and ATEX regulatory framework: IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-31:2013, IEC 60529:2013 (IP rating), EN equivalents (EN 60079-0:2012 +A11:2013; EN 60079-1:2014; EN 60079-31:2014; EN 60529:1991 +A1:2000 +A2:2013), and North American standards (ANSI/ISA 60079-0:2013; ANSI/UL 60079-1:2015; ANSI/ISA 60079-31:2015; CAN/CSA-C22.2 equivalents). Flameproof joints are not field-repairable; consult Hanwha for dimensional specifications. Electrostatic hazard mitigation is required in Group II and III environments per manufacturer guidelines. Equipment must be located to minimize risk of impact or mechanical damage. Clean only with pure-water-dampened soft cloth.
