Lifesafety Power

SKU: FPO150/250-2M8NLCSD16E8M3

Lifesafety Power FPO150/250-2M8NLCSD16E8M3 150W power supply 12A

• Dual-voltage output (12V/24V) supports mixed camera, lock, and reader loads from one unit.
• 8 individually fused 3A ports eliminate daisy-chained adapters and simplify fault isolation.
• Rack, wall, or DIN-rail mountable for flexible deployment in cabinets and closets.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE8M1

Lifesafety Power FPO150/250-3D8P2M8NLCE8M1 150W power supply 12A

• Dual-rated 150W/250W output supports 12V or 24V loads across multi-door deployments.
• Eight individually fused 3A DC outputs allow per-port circuit isolation via Bus1/Bus2.
• Class 2 power-limited design meets UL life-safety requirements for access-control installs.

Lifesafety Power

SKU: FPO150/250-4D8E8P

Lifesafety Power FPO150/250-4D8E8P Power supply board 150W 12A/1

Lifesafety Power

SKU: FPO150/250-B1002C82D8E12M

Lifesafety Power FPO150/250-B1002C82D8E12M 150W power supply 12A

• Selectable 150W or 250W mode delivers 12A/20A at 12VDC or 6A/10A at 24VDC.
• 16 fused outputs (8 relay + 8 aux DC) eliminate external relay modules in mixed-voltage cabinets.
• Per-output FAI, failsafe, or failsecure logic controls independent lock behavior per door group.

Lifesafety Power

SKU: FPO150/E-BOXED

Lifesafety Power FPO150/E-BOXED Smart DC Power Supply/Charger 75W

• Selectable 75W/150W/250W output lets you right-size power to actual load.
• Dual 12VDC/24VDC output supports mixed access control and IP camera endpoints.
• Smart supervisory enables remote fault monitoring and status integration.

Lifesafety Power

SKU: FPO250-2C82D8E4M1

Lifesafety Power FPO250-2C82D8E4M1 Power supply board 250W 20A/1

• Dual-output design supplies 20A@12VDC or 10A@24VDC from a single 250W board.
• Consolidates power for multiple cameras and access control devices in one cabinet.
• Board-level form factor integrates into rackmount enclosures for centralized distribution.

Lifesafety Power

SKU: FPO250-2C83D8PE8M1/T16-A

Lifesafety Power FPO250-2C83D8PE8M1/T16-A 250W power supply 20A

• Delivers 20A at 12VDC or 10A at 24VDC to power locks, readers, and controllers.
• Eight relay outputs, each fused at 3A, isolate faults per channel without system-wide impact.
• Per-output failsafe or failsecure mode lets mixed lock types coexist on one supply.

Lifesafety Power

SKU: FPO250-2C8P3D8PE6M1/P16-A

Lifesafety Power FPO250-2C8P3D8PE6M1/P16-A Power Supply Board 250

• UL-listed 250W supply delivers 12V or 24V switchable output across 40 circuits.
• Ships prewired for 16 relay lock outputs—no custom wiring labor on deployment.
• Form C fault contacts report AC loss, short-to-ground, or blown fuse to BMS.

Lifesafety Power

SKU: FPO250-2D8E4-9DM2

Lifesafety Power FPO250-2D8E4-9DM2 250W Single Voltage 120 VAC 1

• Delivers selectable 12VDC or 24VDC output from a single 250W supply, reducing panel complexity.
• Supports up to eighteen DMP734 16-output aux modules from one centralized 120VAC source.
• Single-voltage architecture eliminates mixed voltage rails, simplifying multi-zone power distribution.

Lifesafety Power

SKU: FPO250-2D8PE1

Lifesafety Power FPO250-2D8PE1 250W power supply 20A/12V or 10A

• 250W capacity supports mixed IP camera and access control loads on a single panel.
• Eight independently selectable 2.5A Class 2 outputs split across two supervised buses.
• Compact 14×12×4.5-inch E1 enclosure fits wall-mount cabinets and rack retrofits.

Lifesafety Power

SKU: FPO250-2M8NLCE2

Lifesafety Power FPO250-2M8NLCE2 250W power supply 20A/12V or 10

• Selectable 12VDC/20A or 24VDC/10A output supports mixed-voltage endpoint deployments.
• Eight individually fused 3A outputs isolate faults per channel, preventing cascade failures.
• 250W centralized distribution eliminates unreliable daisy-chained wall-mount supplies.

Lifesafety Power

SKU: FPO250-4D8PE4M

Lifesafety Power FPO250-4D8PE4M 250W power supply 20A/12V or 10A

• Delivers 20A at 12V or 10A at 24V on the main rail for panels, locks, and magnets.
• Eight auxiliary outputs each supply up to 2.5A class 2 power for isolated circuit feeds.
• Bus1/Bus2 selectable aux outputs prevent cross-talk across multiple fault domains.

Lifesafety Power

SKU: FPO250-4D8PE8M2

Lifesafety Power FPO250-4D8PE8M2 250W power supply 20A/12V or 10

• Dual-bus architecture isolates circuits by function, limiting fault impact across 32 outputs.
• Selectable 12VDC/20A or 24VDC/10A output supports legacy and modern device mixes from one unit.
• Per-output 2.5A cap keeps remaining 31 circuits live if any single output shorts.

Lifesafety Power

SKU: FPO250-B1002C82D8E4

Lifesafety Power FPO250-B1002C82D8E4 FPO250-B1002C82D8E4

• 16 independently fused 3A outputs prevent a single fault from cascading across zones.
• Dual-voltage 12V/4A and 24V/8A outputs support mixed-device installations from one enclosure.
• E4 form factor fits standard electrical cabinets without consuming rack space.

Lifesafety Power

SKU: FPO250-B1002C82D8E4M

Lifesafety Power FPO250-B1002C82D8E4M Power supply board 250W

• Selectable 12VDC/20A or 24VDC/10A output supports mixed-voltage camera deployments.
• 250W board-level form factor integrates into custom enclosures and distributed power architectures.
• Dual voltage flexibility lets integrators support both legacy analog and modern IP endpoints.

Lifesafety Power

SKU: FPO250-B1002C82D8E4M1

Lifesafety Power FPO250-B1002C82D8E4M1 250W power supply 20A/12V

• Drives 16 solenoid locks simultaneously at 20A/12V or 10A/24V primary output.
• Per-output failsafe/failsecure selection lets mag locks and strikes share one supply.
• 16 individually fused 3A auxiliary outputs isolate reader and sensor power from lock loads.