i-PRO WV-U25501-F3L 5MP OUTDOOR IR DOME CAMERA

i-PRO WV-U25501-F3L Overview

The i-PRO WV-U25501-F3L is a 5MP outdoor infrared dome camera engineered for fixed surveillance installations requiring high-resolution capture across day/night conditions in harsh environments. This weather-sealed, vandal-resistant unit delivers 5MP resolution via a 1/2.8-inch CMOS sensor and combines built-in 28-meter infrared illumination with advanced video analytics and FIPS 140-3 cryptographic security—making it suitable for perimeter security, critical infrastructure, and regulated deployment scenarios where compliance and environmental durability are mandatory.

i-PRO WV-U25501-F3L Key Features

• 5MP Resolution with 1/2.8-inch CMOS Sensor: Captures detailed 5.12mm (H) × 3.84mm (V) scanning area, supporting evidence-grade video for identification and forensic review in 30 fps (NTSC) and 25 fps (PAL) modes.
• 3.2mm Fixed Lens, F2.0 Aperture: Wide angular field of view optimized for broad coverage zones with consistent F2.0 maximum aperture enabling superior low-light performance without motorized focusing overhead.
• 28-Meter Built-in IR LED Illumination (92 feet): Provides 0 lux monochrome operation at 28m (30IRE) or 20m (50IRE), eliminating external lighting infrastructure and supporting continuous 24/7 perimeter surveillance in complete darkness.
• Ultra-Low Illumination Sensitivity: Achieves 0.01 lux color capture (50IRE, F2.0, 16/30s, AGC 11) and 0.004 lux monochrome operation with IR—supporting twilight and nighttime identification without auxiliary illumination.
• H.265 and H.264 Codec Support: Dual video compression pathways reduce bandwidth and storage consumption while maintaining quality; configurable between 30 fps (NTSC) and 25 fps (PAL) frame rates with maximum shutter speeds from 1/10000 s to 16/30 s for motion blur control and lighting adaptation.
• 120 dB Dynamic Range with Super Dynamic Processing: Compensates for extreme backlight and glare conditions; adaptive black stretch, back light compensation (BLC), high light compensation (HLC), and fog compensation algorithms preserve detail in challenging lighting transitions.
• i-VMD Video Motion Detection: Standard integrated motion detection engine enabling on-camera alerting, event filtering, and storage optimization without external analytics appliances.
• FIPS 140-3 Level 3 Cryptographic SecureElement (EdgeLock® SE052F by NXP): Hardware-backed key storage and certificate management protect against credential compromise; satisfies FIPS 140-3 validation for regulated environments (healthcare, finance, government).
• NDAA-Compliant Design: Certified compliant with the National Defense Authorization Act supply chain security requirements, meeting federal procurement and critical infrastructure deployment mandates.
• IP66 Weatherproofing and IK10 Vandal Resistance: Sealed against high-pressure water jets, dust, and salt spray; impact-rated to withstand 20 Joules of force (equivalent to 5 kg object dropped from 40 cm)—deployment-ready for outdoor, coastal, and exposed industrial locations.
• Intelligent Imaging Controls: Color/BW (ICR) switching with automatic, IR-light-dependent, and SCC modes; configurable white balance (ATW1/ATW2/AWC); digital noise reduction (0–255 range); and maximum gain control (AGC 0–11) optimize video for varied ambient conditions and analytics accuracy.

i-PRO WV-U25501-F3L Integration & Compatibility

The WV-U25501-F3L supports ONVIF standards for third-party VMS integration, enabling deployment within Milestone Xprotect, Genetec Security Center, Axis Camera Station, and other ONVIF-compliant management platforms. Video motion detection and scene change detection features provide on-camera event filtering, reducing false alarms and enabling edge-based response logic. JPEG snapshots, H.264, and H.265 streams support both legacy and modern codec workflows. Fixed dome mounting accommodates ceiling and wall installation in standard surveillance configurations.