Hanwha XRN-420S-6TB Overview
The Hanwha XRN-420S-6TB is a compact 4-channel network video recorder engineered for small-to-medium deployments requiring high-resolution capture and intelligent analytics integration. This Intel-based NVR supports up to 8MP camera resolution with 50 Mbps recording bandwidth, flexible compression codecs (H.265, H.264, MJPEG), and onboard 6TB storage. The XRN-420S-6TB is ideal for indoor surveillance environments where efficient storage and streamlined PoE-powered camera deployment are priorities.
Hanwha XRN-420S-6TB Key Features
- 4-Channel PoE-Powered Design: Four integrated PoE/PoE+ ports (802.3at) with 50W total budget eliminate external injectors for streamlined installation and reduced cabling complexity.
- 8MP Recording Resolution: Captures network camera feeds up to 8MP (3264x2448 resolution) with support for CIF through full resolution playback on dual HDMI/VGA monitors.
- High-Bandwidth Recording: 50 Mbps maximum recording bandwidth supports simultaneous multi-camera capture without frame dropping or compression artifacts on bandwidth-sensitive installations.
- Flexible Codec Support: Native H.265, H.264, and MJPEG compression ensure compatibility across legacy and modern Wisenet camera lines while reducing storage overhead through efficient codec selection.
- Dual-Stream Recording: Simultaneous primary and secondary bitstream recording enables optimized local playback and remote streaming without re-encoding.
- 32 Mbps Playback Bandwidth: Supports smooth local and remote playback with up to 4 simultaneous users (1 local, 3 remote) and 16-channel simultaneous playback capability (4 local, 4 per remote user).
- AI Search Integration: Object Attribute and Smart Search features activate when integrated with Wisenet AI-enabled cameras, enabling forensic video mining without manual timeline scrubbing.
- Automatic Recovery Backup (ARB): Safeguards critical recordings through automatic failover and data recovery protocols in the event of unexpected shutdown or network interruption.
- Dual Display Output: HDMI and VGA concurrent display ports support multi-monitor control rooms with flexible layout configurations (1, 2V, 2H, 3V, 4, or Sequence modes).
- Mobile Access via QR Code: P2P service with QR code connection streamlines rapid mobile app pairing without manual IP configuration or port forwarding.
- ONVIF Protocol Support: SUNAPI and ONVIF standard compliance enable integration with third-party VMS platforms and non-Hanwha camera devices.
- Event-Driven Recording: Configurable triggers (alarm input, video loss, camera events including motion detection, video analytics, defocus, and audio) with event actions (email, push notification, PTZ preset, alarm output, buzzer, monitor out) minimize storage consumption on low-activity sites.
Hanwha XRN-420S-6TB Integration & Compatibility
The XRN-420S-6TB is protocol-agnostic within its ONVIF and SUNAPI support, enabling deployment alongside third-party IP cameras in mixed-vendor environments. Local display decoding supports 8MP @ 30fps, 1080p @ 120fps, 720p @ 120fps, and D1 @ 120fps resolutions. Advanced playback modes include Clone mode (up to 32M @ 15fps H.265 only), Expand mode, and Single mode for performance optimization across different network configurations. Search modes include Date & Time calendar navigation, Event list filtering, Text-based search, and Smart Search for Wisenet AI camera integration. The embedded Linux operating system provides stable long-term deployments with minimal maintenance overhead. Maximum 4 concurrent users (1 local, 3 remote) with independent simultaneous playback streams ensure multi-operator control room scalability.
