Hanwha HV-X530L-18GHXM-90 16 x Gigabit Ethernet PoE++ switch with

Hanwha HV-X530L-18GHXM-90 Overview

The Hanwha HV-X530L-18GHXM-90 is a 16-port Gigabit Ethernet PoE++ managed switch designed to power and interconnect large-scale IP camera networks. With support for mixed 100M, 1G, 2.5G, and 5G copper ports alongside dual 10GB SFP+ uplinks, this switch delivers the power density and throughput needed for enterprise surveillance deployments. NDAA and TAA compliance ensures suitability for federal and regulated procurement environments.

Hanwha HV-X530L-18GHXM-90 Key Features

• 16 Multi-Speed Gigabit PoE++ Ports: All 16 ports support 100M/1/2.5/5 Gigabit speeds with PoE++ (802.3bt) delivery up to 90W per port, enabling power-hungry PTZ cameras, multi-sensor units, and high-performance edge compute devices on a single infrastructure.
• 720W Total PoE Power Budget: Delivers sufficient aggregate power for simultaneous maximum draw across all ports, supporting fully loaded camera deployments without cascading power constraints or staged activation.
• Dual 10GB SFP+ Uplinks: Two fixed 10 Gigabit SFP+ ports provide non-blocking uplink capacity to core network infrastructure, preventing bottlenecks in high-throughput surveillance architectures.
• 200Gbps Switching Fabric with 148.8Mpps Forwarding Rate: High-performance packet processing ensures ultra-low latency and zero packet loss under full line-rate traffic across all ports simultaneously.
• Low Latency Performance: Sub-microsecond latencies across all speed tiers (8.35µs @ 100Mbps, 7.96µs @ 1Gbps, 5.23µs @ 5Gbps, 2.56µs @ 10Gbps) support real-time video streaming and synchronized multi-camera recording without frame drops.
• Compact 1U Form Factor: 441mm width × 256mm depth × 44mm height (17.36 in × 10.07 in × 1.73 in) and 4.3 kg (9.48 lb) weight fit standard 19-inch rack installations alongside NVRs and network appliances.
• Single Fixed Power Supply: Included redundant power option minimizes single points of failure in mission-critical surveillance environments.
• Advanced Management Features: Stackable architecture and managed switch capabilities support VLAN segmentation, Quality of Service (QoS), port mirroring, and SNMP-based monitoring for integration into enterprise network operations centers.
• NDAA and TAA Compliance: Meets National Defense Authorization Act and Trade Agreements Act requirements, enabling deployment in federal agencies, critical infrastructure, and compliance-sensitive installations.
• Optimized for Hanwha Network Cameras: Engineered interoperability with Hanwha Vision network camera product lines ensures seamless integration, consistent power delivery, and validated performance across camera types and resolutions.

Hanwha HV-X530L-18GHXM-90 Integration & Compatibility

The HV-X530L-18GHXM-90 is designed as a purpose-built infrastructure component for Hanwha Vision network camera systems. Its managed switching capabilities support standard VLAN and network segmentation protocols common to enterprise camera deployments. Dual SFP+ uplinks enable connection to 10G-capable core switches, aggregation switches, or direct attachment to high-performance NVRs. The stackable design allows multiple units to be chained for expanded port capacity while maintaining centralized management. Compatibility extends across Hanwha camera lines including fixed, PTZ, and specialized thermal camera variants.

Hanwha HV-X530L-18GHXM-90 Package Contents

• HV-X530L-18GHxm-90 16-port PoE++ stackable switch unit
• Single fixed power supply
• Power cord