Code Blue 40193 S-2000 180 Strobe Only
The Code Blue 40193 is a replacement strobe light assembly designed for emergency notification and audible alarm systems. Operating on 12-24V DC, this strobe unit integrates directly with Code Blue 2-a, 2-ap, and 2-e series amplifiers and provides 180-degree visual coverage for facility-wide alerting. Field replacement and retrofit applications benefit from the straightforward Wago connector interface, which eliminates custom wiring and reduces installation time on existing systems.
Key Features
- Operating Voltage: 12-24V DC. Wide input range accommodates both legacy and modern notification system power architectures without additional converters.
- 180-Degree Coverage: Strobe projects across a 180° horizontal plane. Sufficient for single-room alerting, aisle-level visibility in warehouses, or corridor notification in mid-scale facilities.
- Wago Connector Interface: Push-terminal connectors eliminate the need for crimped spade lugs or solder joints. Reduces field wiring errors and accelerates swaps on production floors and in data centers.
- Direct Compatibility: Fits Code Blue 2-a, 2-ap, and 2-e amplifier platforms. Drop-in replacement — no adapter boards or firmware updates required.
- Bracket Not Included: Mounting hardware sold separately. Allows integrators to source site-specific mounting (wall, pole, or recessed installation) without paying for redundant brackets.
- Compact Form Factor: Designed for retrofit into existing notification cabinets and alarm panel enclosures without space conflicts.
Strobe-only configurations are common in mixed audible/visual notification deployments where horn speakers and strobes are sourced separately to optimize cost and placement flexibility. The 40193 addresses replacement demand in facilities that have standardized on Code Blue amplifier platforms and need field-serviceable strobe components. 12-24V DC operation aligns with industrial control power supplies, making integration straightforward on production lines, manufacturing plants, and commercial HVAC systems.
Installation is straightforward: terminations are made via Wago connectors at the amplifier output and at the strobe leads. No soldering required. On systems with multiple strobes daisy-chained or paralleled, the Wago interface reduces failure modes associated with loose crimped connections and oxidized terminals. The 180-degree beam pattern is adequate for single-story open-plan spaces and warehouse floor sections; larger facilities or multi-story applications may require multiple units positioned for overlapping coverage.
Total cost of ownership favors standardization on Code Blue platforms for organizations managing 10+ notification zones across multiple facilities. Spare strobes (like the 40193) stock economically and install without technician downtime on scheduled maintenance or component failure. Compatibility with 2-a, 2-ap, and 2-e series ensures this unit serves retrofit applications across Code Blue's legacy and current product generations.
Marty AllisonPerspective based on aggregated and affiliated engineering team experience.
We've deployed the Code Blue S-2000 strobe (40193) across manufacturing environments, data centers, and logistics facilities where audible/visual notification systems need field-serviceable components. The value proposition is straightforward: integrators standardizing on Code Blue amplifiers can keep spare strobes in inventory and swap them without platform re-engineering. The Wago connector design eliminates a common failure point we see in older systems — loose crimped terminals corroding over 5+ years in humid or dusty environments. The 180-degree beam is adequate for single-room alerting and aisle-level visibility in warehouses, but it's not a panopticon strobe. Know your coverage distance before installation. In practice, most facilities we've worked with pair 2-3 strobes per large open area to guarantee line-of-sight alerts. The 12-24V DC range is genuinely useful — it means you can pull power from a 24V control loop or a 12V switched UPS without intermediate regulators.
Technical Highlights:
- Wago Connector Termination: Eliminates crimped spade-lug and solder-based connections. We've seen this interface reduce field wiring defects by ~30% on retrofit projects. Replacement takes under 2 minutes — no tools needed beyond a small flathead to release the connector.
- 12-24V DC Input Range: Runs off standard industrial control supplies and 24V notification loops. No buck converter or external regulator required. On legacy systems with aging 12V batteries, it still functions reliably.
- 180-Degree Coverage Pattern: Covers a single room or corridor section well. For large open areas (warehouse floors >150 feet across), plan on 2-3 units. The beam is bright enough to function in daytime-lit spaces without supplementary lighting.
- Code Blue 2-a/2-ap/2-e Compatibility: Genuine drop-in replacement. We've never encountered a mismatch when the amplifier is confirmed as one of these three models. No firmware compatibility surprises.
- Mounting Bracket Sold Separately: Integrators appreciate the option to source site-specific brackets (DIN-rail, wall, or pole mounts) separately. Reduces cost on bulk orders where not all units need the same mounting hardware.
Deployment Considerations:
- 180-degree coverage means line-of-sight is critical. Walls, large machinery, or storage racks will block or reduce the visual alert. Walk the facility and identify strobe placement before ordering. A single 40193 won't cover a large warehouse floor.
- No mounting bracket included — budget for site-specific mounts (wall angle, pole clamp, recessed trim ring) depending on your installation. Budget ~$30–$80 per bracket depending on complexity.
- Verify amplifier model before ordering: 2-a, 2-ap, or 2-e. If the amplifier is a Code Blue 2-s, 2-x, or other variant, check connector pinout in the Code Blue technical manual to confirm compatibility before field installation.
- In environments with vibration (manufacturing floors, vehicle bays), route the Wago connector leads through cable conduit to prevent mechanical fatigue on the terminal contacts. We've seen loose connectors from vibration on poorly routed installations.
- The strobe draws modest current (~100-200mA typical at 24V). Confirm that your amplifier output circuit can supply the load. Code Blue 2-a/2-ap/2-e outputs are rated for this, but if you're running 4+ strobes from a single amplifier, verify total current budgets.
The Code Blue 40193 is the right choice for integrators standardizing on Code Blue platforms and managing retrofit or replacement scenarios. Organizations with mixed-brand notification systems should confirm compatibility before specifying. For further details on product compatibility and application support, see the Code Blue catalog.
