Altronix T2MK3F4DQ 4-Door Access Control Integration Kit

Altronix T2MK3F4DQ 4-Door Access Control and Power Integration Kit

Overview

The Altronix T2MK3F4DQ is a comprehensive four-door access control integration kit designed for security integrators and IT managers deploying networked access systems. This kit bundles Altronix and Mercury Technologies components to deliver centralized power distribution, network switching, access control management, and integrated device supervision. The T2MK3F4DQ simplifies multi-door deployments by pre-pairing industry-standard access modules with managed power delivery, reducing on-site configuration time and supporting rapid installation across small-to-medium facilities.

Key Features

• Four-Door Access Control Capacity: Supports simultaneous control and supervision of four independent access points with integrated credential readers and electronic locks
• Altronix Trove2M2 Enclosure: Compact, wall-mount form factor designed for distributed power and device integration in access control applications
• eFlow6NB Network Switch: Managed Gigabit Ethernet switching for IP camera, access control, and intercom device connectivity with built-in network segmentation support
• LINQ2 Access Control Module: Two-door access control interface with integrated credential reader support, configurable relay outputs for electric strike and mag-lock control, and door-state supervision
• ACM4CB Credential Reader Interface: Four-channel credential reader multiplexer enabling wiegand, magnetic stripe, and RFID badge integration across multiple reader locations
• VR6 Voltage Regulator: Regulated 12VDC or 24VDC output for auxiliary device power, supporting door sensors, request-to-exit (REX) buttons, and field devices with stable voltage delivery
• PDS8CB Power Distribution Supervisor: Eight-channel supervised power distribution with individual relay outputs for lock control, with built-in status reporting and electrical fault detection
• Integrated Power Backup Capability: Kit components support battery backup integration for uninterrupted access control during utility power loss
• Centralized Supervision: All kit components provide electrical and operational status reporting to the access control management system, enabling proactive fault identification
• Pre-Integrated Design: Components are mechanically and electrically paired for Trove2M2 mounting, reducing integration labor and field wiring errors

Integration and Compatibility

The T2MK3F4DQ components integrate within the Altronix Trove2M2 form factor, a compact wall-mount enclosure commonly deployed in entry vestibules, server rooms, and main corridors. The eFlow6NB provides network connectivity for all supervised devices, supporting IP-based access control platforms that leverage standard Ethernet protocols. The LINQ2 and ACM4CB combination delivers two-door control capacity with four credential reader inputs, accommodating entrance/exit pairs with main and secondary reader configurations. The VR6 and PDS8CB deliver supervised power to electric locks, mag-locks, door sensors, and auxiliary field devices, with individual relay outputs enabling granular lock-level fault detection. The kit supports both 12VDC and 24VDC auxiliary power rails, enabling compatibility with common North American lock and sensor voltages. Integration with third-party access control management platforms depends on gateway or controller compatibility; consult the facility's access management system documentation for port and protocol support.

Package Contents

• Altronix Trove2M2 wall-mount enclosure
• eFlow6NB managed Gigabit Ethernet switch
• LINQ2 two-door access control module
• ACM4CB four-channel credential reader interface
• VR6 regulated voltage regulator (12VDC or 24VDC output)
• PDS8CB eight-channel supervised power distribution module

Marty Allison

During the planning phase for a mid-size office access control upgrade, I evaluated the Altronix T2MK3F4DQ as a candidate for consolidating power, switching, and access control into a single enclosure. The pre-integrated design significantly reduced the field integration burden compared to sourcing and mounting individual components separately.

Technical Highlights:

• Four-Door Capacity with Credential Flexibility: The LINQ2 provides two-door control, and the ACM4CB adds four credential reader inputs, supporting dual-reader configurations (main and secondary) at each door for badge and PIN or biometric + card fallback scenarios.
• Supervised Power Distribution: The PDS8CB delivers eight independently supervised relay outputs with status feedback, enabling the access control system to detect lock failures, sensor short circuits, or wiring faults at the device level rather than inferring failures from access attempts.
• Integrated Network Switching: The eFlow6NB eliminates the need for a separate managed switch in small deployments, providing VLAN segmentation for access control traffic separate from general data or camera networks.

Deployment Considerations:

• The VR6 voltage regulator must be configured for the facility's auxiliary device voltage (12VDC or 24VDC); verify all connected lock and sensor equipment before final wiring to prevent damage from voltage mismatch.
• The T2MK3F4DQ assumes a single Trove2M2 enclosure location; facilities with geographically distributed door groups may require multiple kits or extended wiring runs that should be evaluated against cable budget and voltage drop during load testing.
• Battery backup integration is supported by the kit architecture but requires separate specification of batteries and charging circuits; coordinate with the facility's UPS or dedicated battery backup plan during project scoping.

For integrators deploying four-door systems at small-to-medium facilities without extensive legacy constraints, the T2MK3F4DQ offers a well-matched component set with minimal wiring and a predictable form factor. Verify credential reader protocols and management software compatibility with your access control platform before procurement.