2N IP Touch & Verso Intercom Accessories | Mounts, Modules, Parts

Plan Your Deployment

Model compatibility (IP Touch vs Verso variants)
Flush vs surface mounting and installation surface type
Module expansion needs (camera, keypad, RFID, etc.)
Weather protection and outdoor durability requirements
Serviceability and replacement part planning

Showing Results for 2N IP Touch, Verso, & Intercom Accessories

Compare

Out of stock
2N

SKU: 01253-001

2N IP Verso Nickel Modular Keypad - 01253-001

Numeric keypad with backlit display, PoE powered, outdoor-rated nickel finish
- Backlit numeric keys for PIN entry and access control in low-light conditions
- PoE power eliminates separate infrastructure, simplifying installation and wiring
- Modular design integrates with 2N IP Verso ecosystems for scalable deployments
In stock · Ships same business day Special Order · Ships in 2-3 weeks

$299.00 $289.99 Save $9.01

Add to Cart
The item has been added
Free shipping over $499

$299.00 $289.99 Save $9.01

Add to quote Compare
Compare

Add to Cart The item has been added
2N

SKU: 01288-001

2N IP Verso Single Module Black Surface Installation Frame - 01288-001

Single-module surface frame for 2N IP Verso intercom systems
- Mounts directly to walls or surfaces without additional accessories
- Holds one 2N IP Verso intercom or access control module
- IK08-rated black finish for indoor and covered outdoor use
Special Order · Ships in 2-3 weeks

$69.00 $66.99 Save $2.01

Add to Cart
The item has been added
Free shipping over $499

$69.00 $66.99 Save $2.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
2N

SKU: 01260-001

2N IP Verso Tamper Switch Module - 01260-001

Internal tamper detection for 2N IP Verso intercoms without external mounting
- Detects unauthorized opening with mechanical switch contact output to control panel
- Installs inside unit in designated location; no module slot or front-panel space required
- Integrates directly or through I/O Module (01257-001) and Wiegand Module (01259-001)
In stock · Ships same business day

$49.00 $47.99 Save $1.01

Add to Cart
The item has been added
Free shipping over $499

$49.00 $47.99 Save $1.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
2N

SKU: 01385-001

2N Mifare RFID Smart Key Fob 13.56 MHz - 01385-001

Mifare RFID key fob at 13.56 MHz for contactless facility access
- Mifare technology integrates with 2N and third-party RFID readers
- Compact key fob form factor fits easily alongside standard keys
- 13.56 MHz HF frequency optimized for indoor access control range
In stock · Ships same business day

$7.00 $6.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$7.00 $6.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
Axis

SKU: 02070-001

Axis TI8901 Stainless Steel Face Plate Replacement - 02070-001

Stainless steel replacement face plate for AXIS I8016-LVE intercom
- Chrome-finished stainless steel with vandal-resistant design for public installations
- Plug-and-play replacement compatible with AXIS I8016-LVE Network Video Intercom
- Corrosion-resistant construction for indoor and outdoor intercom applications
Special Order · Ships in 2-3 weeks

$199.00 $192.99 Save $6.01

Add to Cart
The item has been added
Free shipping over $499

$199.00 $192.99 Save $6.01

Add to quote Compare
Compare

Out of stock
2N

SKU: 01388-001

2N Magnetic Door Contact - 01388-001

Wired magnetic door contact for 2N intercom and access control
- Real-time door open/close detection with instant security alerts
- Wired connectivity eliminates battery concerns for permanent installations
- Compact design mounts quickly on door frames with minimal tools
Special Order · Ships in 2-3 weeks

$25.00 $23.99 Save $1.01

Add to Cart
The item has been added
Free shipping over $499

$25.00 $23.99 Save $1.01

Add to quote Compare
Compare

Add to Cart The item has been added
2N

SKU: 01258-001

2N IP Verso 5 Button Nameplate with Name Tag - 01258-001

5-button quick-dial nameplate with backlighting for 2N IP Verso
- Five mechanical buttons with backlit design for low-light visibility
- Customizable name tags label each button for tenant or department routing
- Modular accessory integrates directly with 2N IP Verso intercom systems
Special Order · Ships in 2-3 weeks

$139.00 $134.99 Save $4.01

Add to Cart
The item has been added
Free shipping over $499

$139.00 $134.99 Save $4.01

Add to cart Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

PoE Budget & Power Planning

2N IP Touch and Verso units vary in power draw depending on installed expansion modules and audio amplification. Verify your PoE budget before deploying multiple intercoms on the same switch, or integrate dedicated power supplies to avoid mid-deployment failures.

Compatibility & Firmware Alignment

Accessories like I/O expansion modules and keypads require firmware version matching on the parent intercom unit. Always confirm the firmware revision on your IP Touch or Verso before ordering modules, and consult our team if you're retrofitting older units.

Environmental & Weatherproofing

Surface mounts and outdoor recessed frames must match the IP rating (IP54, IP65, IP66) of your installation location. System failures often begin at the physical layer — verify gaskets, drainage, and UV-rated plastics for covered outdoor deployments.

Integration with Access Control & Building Automation

Relay output modules and dry-contact I/O cards are the bridge between intercom call logic and door strikes, magnetic locks, or building management systems. Plan I/O card selection during the design phase to avoid costly mid-project hardware swaps.

Network Core & Bandwidth Assumptions

Network bottlenecks at the switch or edge router can degrade intercom audio quality and call reliability across large multi-building campuses. Ensure your network core has capacity for intercom codecs (G.711, G.722) and background video or paging traffic.

Spare Parts & Serviceability

Keep replacement handsets, audio modules, and common connectors in stock for mission-critical intercom deployments. Backup units reduce mean-time-to-repair (MTTR) on campuses, hospitals, and secure facilities where intercom downtime impacts safety and operations.

Technology Stack

The specs and acronyms that actually affect 2n ip touch, verso, & intercom accessories performance.

PoE (Power over Ethernet)

Supplies power and data over a single Ethernet cable. Standard PoE (802.3af) provides 15.4W; PoE+ (802.3at) provides 30W. 2N intercoms with expansion modules often require PoE+ or a dedicated power supply to avoid brownouts during peak voice/video traffic.

I/O Expansion Cards

Relay output modules with isolated dry contacts (Form A/C) allow the intercom to trigger door strikes, gate openers, or notifications. Verify relay rating (24 VDC nominal, 2A typical) matches your access control wiring and voltage.

Audio Codecs (G.711, G.722, Opus)

Digital voice compression standards that balance call clarity and bandwidth. G.711 (64 kbps) is universal; G.722 (64 kbps, wideband) improves intelligibility on noisy sites. Confirm codec support on both the intercom and your network edge.

IP Rating (IP54, IP65, IP66)

Ingress Protection code denoting dust and water resistance. IP54 suits covered porches; IP65 suits light rain/spray; IP66 suits direct spray or high-pressure wash-down. Critical for outdoor entry vestibules and loading docks.

VLAN & QoS (Quality of Service)

Virtual LANs isolate intercom traffic from surveillance and office data. QoS markings (DSCP, 802.1p) ensure the switch prioritizes voice packets during congestion—essential for multi-location deployments sharing bandwidth.

Keypad Wiegand Interface

Wiegand protocol transmits RFID badge or numeric PIN data to the intercom for access verification. Common in campus entry and secure vestibule scenarios. Confirm wiring distance (typically <100 ft) and voltage supply (12VDC) before installation.

Typical Deployment Scenarios

Multi-Building Campus (8 Entry Points)

Deploy 2 IP Touch intercoms at each of 4 building entries + 1 Verso unit at the main gatehouse. Each IP Touch requires a recessed frame, relay I/O module, and RFID keypad for badge reader integration. Use PoE+ switches with VLAN/QoS to isolate voice traffic. Spare handsets and audio modules reduce MTTR during student/staff peak hours.

Hospital or Secure Facility (12 Checkpoints)

Install IP Touch units at emergency entrance, pharmacy, surgery suite, and isolation wards. Each needs 2-relay I/O expansion for door strike, alarm bell, and video record triggers. Deploy 24 VDC backup power supplies to maintain emergency operation during mains failure. Standardize on G.722 codec to ensure clarity in high-noise environments.

Retrofit Parking Garage & Loading Dock (6 Stations)

Upgrade 6 older intercoms to 2N Verso units with IP65 surface mounts and stainless-steel frames. Add relay modules to each for gate operator and truck dock door control. Install PoE injectors at switch because existing cabling predates PoE+. Integrate with license-plate-recognition (LPR) camera signal for selective entry authorization.

Multi-Tenant Office Building (20 Unit Directory)

Centralize main lobby Verso intercom with expansion module supporting 16 relay outputs. Wire relay outputs to individual tenant door strikes. Mount IP Touch sub-units in 3 stairwell landings using recessed frames. Use numeric keypads for suite number entry. VLAN segregate intercom traffic from building-wide surveillance to maintain reliable PoE distribution.

Frequently Asked Questions

What is the difference between 2N IP Touch and 2N Verso?

IP Touch is a compact, modular intercom suited for single-door and small-campus deployments with optional expansion cards. Verso is a larger, industrial-grade unit designed for high-traffic entry points and complex integration scenarios. Verso units accept more expansion modules and handle higher call volumes. Choose IP Touch for distributed access points and Verso for main gatehouse or main entrance roles.

Do I need PoE+ for 2N IP Touch with an I/O expansion card?

Yes. Base IP Touch units operate on standard PoE (15.4W), but adding a relay I/O card, RFID reader, or audio amplifier typically exceeds 30W total, requiring PoE+ (802.3at, 30W per port). If your switch does not support PoE+, use a dedicated 24 VDC power supply and PoE injector to avoid call failures during peak usage.

Can I use an old 2N intercom handset on a new IP Touch unit?

Handsets are not backward-compatible across all 2N generations. Always verify the handset model number and the IP Touch/Verso firmware version before ordering a replacement. Older analog handsets will not function on IP-based units. We recommend ordering the exact OEM handset assembly to ensure audio quality and protocol compatibility.

What relay rating do I need for a door strike or gate opener?

Most 2N I/O relay modules provide Form A/C dry contacts rated 24 VDC, 2A maximum. Verify your access control door strike or gate operator uses compatible voltage and current. If it draws more than 2A, use an external contactor or relay module with a higher rating, and do not exceed the intercom's relay contact limit.

How do I ensure audio quality across a multi-building network?

Use QoS and VLAN separation to prioritize voice traffic and avoid packet loss during peak video or paging usage. Deploy G.722 wideband codec (if your network core supports it) for superior clarity in high-noise environments like loading docks or manufacturing floors. Test latency (<150 ms one-way) between buildings before final deployment.

Which recessed frame should I order for my IP Touch in an outdoor vestibule?

Select a frame with IP65 or IP66 rating to resist rain and spray in covered outdoor spaces. Verify the frame is rated for the same temperature range as your climate (e.g., -20°C to +60°C for northern climates). Check that gaskets and drainage holes match the frame model, and use stainless-steel fasteners to prevent corrosion in corrosive environments.

2N IP Touch, Verso, & Intercom Accessories

Plan Your Deployment

Showing Results for 2N IP Touch, Verso, & Intercom Accessories

2N IP Verso Nickel Modular Keypad - 01253-001

2N IP Verso Single Module Black Surface Installation Frame - 01288-001

2N IP Verso Tamper Switch Module - 01260-001

2N Mifare RFID Smart Key Fob 13.56 MHz - 01385-001

Axis TI8901 Stainless Steel Face Plate Replacement - 02070-001

2N Magnetic Door Contact - 01388-001

2N IP Verso 5 Button Nameplate with Name Tag - 01258-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for 2N IP Touch, Verso, & Intercom Accessories

Frequently Asked Questions

Related Categories

Engineering Reading