Refine by

No filters applied

Electrical & Power

Electrical and power components provide the foundation for reliable surveillance and access control system operation. Proper power delivery, distribution, and protection planning ensures stable performance and reduces system downtime in commercial environments.

Plan Your Deployment

Voltage requirements and device compatibility
Power budgeting across cameras and access devices
Centralized vs distributed power design
Surge protection and environmental safeguards
Redundancy and uptime planning

Get Recommendations Infrastructure

Sub categories

Adapter Boxes & Plates

13 items

Conduit Adapters

15 items

Conduit Bases, Boxes, & Covers

21 items

Converter Plates

1 item

Electrical Boxes & Enclosures

223 items

Gang Plates

12 items

Installation Boxes

2 items

Junction Boxes

45 items

Power Supplies

1245 items

Showing Results for Electrical & Power

Compare

Out of stock
Digi International

SKU: 76000701

Digi International 76000701 DIGI ONE PortServer TS II 4-Pack

Four serial device servers for Ethernet-based legacy equipment access
Special Order · Ships in 2-3 weeks

$38.00 $37.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$38.00 $37.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000702

Digi International 76000702 CM/Passport 8-Pack DB-9M Modem

8-pack DB-9M modems for serial communication across distributed sites
Special Order · Ships in 2-3 weeks

$75.00 $74.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$75.00 $74.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000723

Digi International 76000723 4FT Serial Cable RJ-45 Male

4ft RJ-45 serial cable rated for 10/100 Mbps industrial networks
Special Order · Ships in 2-3 weeks

$25.00 $24.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$25.00 $24.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
Digi International

SKU: 76000724

Digi International 76000724 48-Inch DB-9 Bare Wire Cable

48-inch DB-9 bare wire cable for serial port custom wiring
In stock · Ships same business day

$25.00 $24.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$25.00 $24.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Digi International

SKU: 76000732

Digi International 76000732 48 Power Cord Locking Barrel

4' power cord with locking barrel connector for Digi 48 series
In stock · Ships same business day

$17.00 $16.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$17.00 $16.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000734

Digi International 76000734 12VDC/120-240VAC Power Supply

Dual-input 12VDC supply converts 120–240VAC for global deployments
Special Order · Ships in 2-3 weeks

$46.00 $45.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$46.00 $45.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000735

Digi International 76000735 12VDC 0.5A Power Adapter

Dual-voltage 12VDC 0.5A wall adapter for global Digi device deployments
Special Order · Ships in 2-3 weeks

$43.00 $42.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$43.00 $42.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000736

Digi International 76000736 12VDC/120-240VAC Extended

12VDC power supply, 120-240VAC input, -35°C to 74°C operation
Special Order · Ships in 2-3 weeks

$108.00 $107.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$108.00 $107.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000738

Digi International 76000738 12VDC/90-264VAC Wall Mount Power

Wall-mount 12VDC supply, universal 90–264VAC input for global use
Special Order · Ships in 2-3 weeks

$60.00 $59.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$60.00 $59.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000752

Digi International 76000752 12VDC/100-240VAC Extended

12VDC industrial power supply, 100-240VAC input, -35°C to 74°C
Special Order · Ships in 2-3 weeks

$108.00 $107.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$108.00 $107.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000756

Digi International 76000756 DIN Rail Bracket Kit

Stainless steel DIN rail bracket kit for Digi device cabinet mounting
Special Order · Ships in 2-3 weeks

$24.00 $23.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$24.00 $23.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000769

Digi International 76000769 AC Power Cord US to IEC

US to IEC C13 AC power cord for Digi networking equipment
Special Order · Ships in 2-3 weeks

$21.00 $20.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$21.00 $20.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000842

Digi International 76000842 GPS Antenna with Magnet Mount

Magnetic-mount GPS antenna for Digi cellular gateways
In stock · Ships same business day Special Order · Ships in 2-3 weeks

$33.00 $32.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$33.00 $32.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000912

Digi International 76000912 ConnectTank Replacement Battery

OEM replacement battery for Digi ConnectTank backup power
Special Order · Ships in 2-3 weeks

$86.00 $85.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$86.00 $85.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
Digi International

SKU: 76000926

Digi International 76000926 Indoor SMA Male 3dBi Antenna

Indoor SMA antenna with 3dBi gain for compact wireless deployments
Special Order · Ships in 2-3 weeks

$16.00 $15.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$16.00 $15.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
Digi International

SKU: 76000954

Digi International 76000954 Antenna Base Connector

SMA female antenna base connector for Digi wireless devices
Special Order · Ships in 2-3 weeks

$29.00 $28.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$29.00 $28.99 Save $0.01

Add to quote Compare

Browse by Product Family

Click through to shop the families that fit your electrical & power deployment.

PoE Injectors & Midspan Units

Single and multi-port PoE injectors that deliver power and data over Ethernet to cameras and access points. Essential for retrofitting non-PoE infrastructure or expanding beyond switch capacity.

Power Supplies & Adapters

Industrial-grade AC/DC converters and 12V/24V regulated supplies for cameras, encoders, door controllers, and auxiliary equipment. Built for 24/7 operation and wide temperature ranges.

UPS & Battery Backup

Uninterruptible power supplies and battery modules designed to keep surveillance and access control systems operational during mains failure. Sized for edge recorders, NVRs, and networked devices.

Power Distribution & Surge Protection

Surge protectors, DIN-rail power distribution blocks, and protected outlets for sensitive surveillance electronics. Protect against voltage spikes and lightning-induced transients.

Cable & Connector Assemblies

Terminated power cables, barrel connectors, and DC pigtails pre-assembled for quick camera and device integration. Reduces field termination errors and speeds deployment.

What to Look For When Buying

The decisions that matter most before you spec.

PoE Budget Planning & Oversubscription Risk

PoE switches are frequently rated for more cameras than their actual power budget allows. Read PoE Budget Planning for IP Camera Deployments to understand injector and supply sizing before deployment. Undersizing power delivery is a leading cause of intermittent camera failures and system collapse under load.

Power Failure Cascades & System Downtime

When electrical infrastructure fails, entire surveillance zones go dark. Why Surveillance Systems Fail During Incidents documents how inadequate power conditioning and lack of UPS cause loss of footage during security events. Plan battery backup for NVRs, edge recorders, and access control hubs.

Cable Distance & Voltage Drop

PoE and DC power delivery degrade over distance; runs beyond 100 meters often require midspan injectors or stepped-up supplies. Verify cable gauge and run length before selecting power distribution topology to avoid under-voltage conditions at the camera.

Multi-Location Standardization

Why Surveillance Standards Collapse After the Third Location shows how power supply mismatches across sites create maintenance nightmares. Choose a consistent voltage (12V, 24V, or PoE) and supplier throughout your deployment to reduce spare parts inventory and service complexity.

Redundant & Managed Power Distribution

Enterprise deployments benefit from redundant power paths, monitored PDUs, and ring topologies that isolate failures. Higher-end Honeywell and i-PRO systems often integrate power monitoring; plan accordingly for large campuses or critical facilities.

Environmental & Temperature Ratings

Outdoor and harsh-environment installations demand industrial-grade supplies rated for extended temperature, humidity, and vibration. Confirm operating range and mean-time-between-failure (MTBF) specifications before deployment in uncontrolled spaces.

Technology Stack

The specs and acronyms that actually affect electrical & power performance.

Power over Ethernet (PoE)

Delivers power and data via Cat5e/6 cable to end devices, eliminating separate power runs. Standard PoE (15.4W) and PoE+ (30W) cover most IP cameras; PoE++ (60–90W) supports high-power PTZ and multi-sensor units. Budget for realistic camera counts per switch to avoid brownout conditions.

Volt & Amperage (12V DC, 24V AC/DC)

Most analog and IP camera supplies operate at 12V DC or 24V AC. Verify polarity and current draw (mA or A) to select the right supply gauge; undersized supplies cause brownout and intermittent operation. Industrial systems often standardize on 24V for longer cable runs with less voltage drop.

Uninterruptible Power Supply (UPS)

Provides instant switchover to battery during mains failure, keeping NVRs, access control panels, and network infrastructure online. Capacity is measured in VA (volt-amperes) and run-time minutes; size for critical equipment and desired hold-up duration (typically 15–60 minutes).

Surge Protection & Transient Voltage Suppression (TVS)

Clamps lightning and inductive load spikes to safe levels, preventing component damage. Essential on outdoor camera circuits and near HVAC, door motors, and panel relays. Look for devices with replaceable cartridges or indication lights.

DIN-Rail Power Distribution

Modular power supplies and distribution blocks mounted on standard 35mm rail for easy expansion and maintenance. Common in control rooms, server racks, and equipment shelters; simplifies wiring and reduces clutter.

Cable Gauge & Voltage Drop

Thicker wire (lower AWG) reduces resistance and voltage loss over distance. For 12V runs >30m or 24V runs >50m, use oversized cable or inject power mid-span. Poor power distribution cascades into storage and network failures.

Typical Deployment Scenarios

Campus with Distributed Cameras (50–100 units)

Deploy a central PoE+ switch (24–48 ports) in the server room backed by a 2kVA UPS, with midspan Geovision or Honeywell injectors at remote buildings. Use surge-protected DIN-rail distribution and a 10–15 minute UPS hold-up to ensure graceful shutdown during mains failure.

Retrofit with Mixed 12V & PoE Cameras

Combine PoE cameras (via switch injector) with legacy 12V dome cameras (fed by industrial 12V DC supply + surge protector). Standardize termination and cable routing to simplify future moves/adds/changes. Size supply at 1.5× total expected load to handle inrush current.

Remote Unmanned Site (10–15 cameras)

Use a compact PoE injector or managed PoE+ switch, protected by a DIN-rail surge module and a 500VA UPS with 30–45 minute battery runtime. Include a backup 4G cellular gateway powered by the same UPS to retain remote access if mains fails.

Access Control + Video Integration (multi-reader facility)

Deploy redundant 24V AC supplies for door controllers and readers, with a separate 12V DC power budget for IP intercoms. Size a 3–5kVA UPS with extended runtime to hold access and surveillance during emergencies; add battery monitoring to alert before depletion.

Top Brands for Electrical & Power

Click through to each brand for engineering profile and NDAA compliance status.

Honeywell

Authorized dealer · browse the full Honeywell catalog for this category

Geovision

Authorized dealer · browse the full Geovision catalog for this category

i-PRO

Authorized dealer · browse the full i-PRO catalog for this category

Axis

Authorized dealer · browse the full Axis catalog for this category

Hikvision

Authorized dealer · browse the full Hikvision catalog for this category

Frequently Asked Questions

How many cameras can one PoE switch really support?

Rated port count does not equal real-world capacity. A 24-port PoE+ switch (370W budget) typically supports 10–14 high-powered cameras, not 24. Learn why PoE switches fail before rated count and plan injectors or additional switches accordingly.

What size UPS do I need for my surveillance system?

Calculate total watts of all equipment (NVR, switch, access control, intercoms) and multiply by 1.2 for safety. A 1000W device requires a 1.2kVA UPS minimum. For 30–60 minute hold-up, add battery packs. Consult the UPS datasheet runtime table for your exact load.

Can I run cameras over long cable distances without power loss?

Beyond 100 meters, voltage drop becomes significant. Use thicker cable (e.g., 10/2 instead of 18/2) or deploy a midspan PoE injector at the halfway point. Test actual voltage at the camera before and during operation to confirm it meets the minimum 11.5V for PoE devices.

Should I use surge protection outdoors?

Yes. Outdoor camera runs, especially on poles or towers, attract lightning transients that destroy unprotected equipment. Install a surge-suppression cartridge or dedicated SPD (Surge Protective Device) at the camera supply entry point.

What's the difference between 12V and 24V supplies?

24V systems have lower current for the same power, so they suffer less voltage drop over distance and are preferred for long cable runs and industrial deployments. 12V is common in legacy and compact camera designs. Choose based on your camera specs, not preference; mixing standards requires careful supply sizing and testing.

How often should I test my UPS battery backup?

Test battery runtime (load test) at least quarterly, or annually if the UPS is older. Monitor battery age; most UPS batteries degrade after 3–5 years and should be replaced proactively. For critical facilities, use a monitored UPS with email alerts for battery health.

Related Categories

Adjacent equipment that typically ships alongside these products.

Mounting Brackets & Kits Installation Hardware & Kits Covers & Protection Software & Licenses Connectivity & Media Compliance & Site Essentials

Engineering Reading

Deep-dives from our engineering team on deployment planning.

Why Surveillance Systems Fail During Incidents Why Your NVR Can't Handle Its Rated Camera Count Why Surveillance Networks Collapse at the Core Why Large Surveillance Systems Fail: Storage Throughput Reality Why Surveillance Standards Collapse After the Third Location Why 4K Cameras Fail at Night Why Your PoE Switch Fails After 18 Cameras Frame Rate vs. Reality: When 30 FPS Makes Your System Worse