Thermal IP Cameras
Showing Results for Thermal IP Cameras
-
Hanwha
SKU: TNO-C3050T
Hanwha TNO-C3050T Wisenet T network thermal compact bullet
- Wisenet T compact thermal bullet network camera
- VGA/QVGA thermal sensor for heat-based intrusion detection
- Discreet bullet form factor for perimeter pole and wall mount
$4,500.00 $2,931.99 Save $1,568.01The item has been added -
Hanwha
SKU: TNO-C3052T
Hanwha TNO-C3052T Thermal Bullet Camera
24/7 thermal bullet camera with AI detection for perimeter security
- 384 x 288 thermal resolution with AI person & vehicle detection
- IP66 weatherproof, IK10 impact resistant for outdoor harsh conditions
- PoE 802.3af powered with H.265 compression, no separate supply needed
$4,500.00 $2,931.99 Save $1,568.01The item has been added -
Hanwha
SKU: TNO-C3060T
Hanwha TNO-C3060T Wisenet T network thermal compact bullet camera 384 x 288
$6,250.00 $4,071.99 Save $2,178.01The item has been added -
Hanwha
SKU: TNO-C3062T
Hanwha TNO-C3062T Wisenet T network thermal compact bullet camera 384 x 288
$6,250.00 $4,071.99 Save $2,178.01The item has been added -
Hanwha
SKU: TNO-C3080T
Hanwha TNO-C3080T Wisenet T network thermal compact bullet camera 384 x 288
$8,950.00 $5,830.99 Save $3,119.01The item has been added -
Hanwha
SKU: TNO-C3082T
Hanwha TNO-C3082T Thermal Compact Bullet Camera
Thermal bullet camera with 60mm lens for long-range perimeter surveillance
- 384 x 288 thermal resolution detects persons and vehicles in total darkness
- 6.2° narrow FOV with 60mm fixed lens for distant target acquisition
- IP66 weatherproof, IK10 impact resistant, PoE powered for outdoor mounting
$8,950.00 $5,830.99 Save $3,119.01The item has been added -
Hanwha
SKU: TNO-L3030T
Hanwha TNO-L3030T Thermal IP Camera 320x240
Thermal IP camera 320x240 with <60mK sensitivity for 24/7 perimeter monitoring
- 320x240 uncooled micro bolometer detects heat signatures in total darkness
- IP66/IK10 ruggedized housing rated -40°C to +60°C with PoE power option
- H.265/H.264 compression up to 8fps with motion detection and temperature alerts
$4,100.00 $2,670.99 Save $1,429.01The item has been added -
Hanwha
SKU: TNO-L4030T
Hanwha TNO-L4030T VGA Thermal IP Camera
640×480 thermal IP camera for complete-darkness surveillance with <50mK sensitivity
- VGA thermal imaging (640×480) with 17µm pixels detects subtle temperature changes
- IP66/IK10 aluminum housing rated -40°C to +60°C for extreme outdoor conditions
- H.265/H.264/MJPEG with WiseStream II smart codec; 8 motion zones with gyro stabilization
$7,000.00 $4,559.99 Save $2,440.01The item has been added -
Hanwha
SKU: TNO-L4030TR
Hanwha TNO-L4030TR Thermal Radiometric Bullet Camera
Thermal radiometric bullet with ±5°C accuracy for temperature monitoring
- 640x480 thermal VGA with 6 ROI zones and spot temperature reading
- ±5°C accuracy (≤100°C), -20°C to 130°C range for industrial diagnostics
- IP66/IK10 sealed housing, PoE powered, H.265 compression with edge storage
$8,400.00 $5,471.99 Save $2,928.01The item has been added -
Hanwha
SKU: TNO-L4040T
Hanwha TNO-L4040T Outdoor Thermal AI Bullet Camera
640x480 thermal bullet with AI analytics for 24/7 perimeter detection
- 640x480 thermal resolution with 19mm lens for long-range detection in any light
- AI motion detection, loitering alerts, line crossing, and appear/disappear tracking
- IP66/IK10/NEMA 4X rated; PoE, 24VAC, or 12VDC power; up to 256GB edge storage
$7,000.00 $4,559.99 Save $2,440.01The item has been added -
Hanwha
SKU: TNO-L4040TR
Hanwha TNO-L4040TR Outdoor Thermal AI Bullet Camera
640x480 thermal bullet with AI analytics for extreme outdoor conditions
- Detects motion, loitering, entry/exit, tampering via AI without visible light
- IP66 weatherproof, IK10 vandal-resistant housing rated for -20°C to 130°C
- PoE, 24VAC, or 12VDC power options with H.265 compression and microSD storage
$8,400.00 $5,471.99 Save $2,928.01The item has been added -
Hanwha
SKU: TNO-L4050T
Hanwha TNO-L4050T Thermal Bullet Camera
640x480 thermal bullet camera for 24/7 perimeter detection in any light
- Uncooled micro bolometer sensor operates -40°C to +60°C without active cooling
- 35mm F1.0 fixed lens with 17.2° FOV for long-range perimeter surveillance
- IP66 weatherproof, IK10 vandal-resistant, H.265 compression on PoE 802.3af power
$8,400.00 $5,471.99 Save $2,928.01The item has been added -
Hanwha
SKU: TNO-X6320EPT0-Z
Hanwha TNO-X6320EPT0-Z Explosion-Proof Thermal Camera
Explosion-proof thermal bullet camera for hazardous industrial sites
- 2MP thermal, 60fps with 32x optical zoom for detection through smoke/darkness
- Ex d IIC T4 certified; stainless steel 316L IP66 housing rated –60°C to +60°C
- PoE powered (12W max) with H.265/H.264 codec and intelligent motion analytics
$8,395.00 $5,468.99 Save $2,926.01The item has been added -
Hanwha
SKU: TNU-4041T
Hanwha TNU-4041T Thermal PTZ Camera 640x480
640x480 thermal PTZ with 360° pan and 300 presets for perimeter security
- 360° endless pan at 120°/sec with ±0.3° preset accuracy for automated tracking
- <50mK thermal sensitivity uncooled sensor captures heat signatures at 30fps H.265
- IP66/IK10 rated metal housing with PoE power and gyro-stabilized imaging
$14,250.00 $9,282.99 Save $4,967.01The item has been added -
Hanwha
SKU: TNU-4051T
Hanwha TNU-4051T Thermal PTZ Camera 640x480
Long-range thermal PTZ with 640x480 and ≤50mK sensitivity for perimeter security
- Detects heat signatures beyond 118 feet with 35mm F1.0 fixed focal length
- 360° endless pan, -90° to +40° tilt with ±0.3° preset accuracy and gyro stabilization
- IP66/NEMA4X outdoor rated, PoE powered at 62–84W with onboard motion and thermal analytics
$16,000.00 $10,422.99 Save $5,577.01The item has been added -
Hanwha
SKU: TNU-4051T/KUS
Hanwha TNU-4051T/KUS WISENET T Thermal Network Camera
- WISENET T thermal network camera with 32x optical zoom
- 160x120 thermal upscaled to 2MP for extended detection
- IP66 weather-sealed and IK10 impact-rated outdoor housing
$16,000.00 $10,422.99 Save $5,577.01The item has been added
Thermal IP Cameras
Thermal IP cameras detect heat signatures rather than visible light, enabling reliable detection in darkness, glare, smoke, and other low-visibility conditions. These cameras are commonly used for perimeter security, wide-area detection, and high-value asset protection.
Plan Your Deployment
- Detection range and identification expectations (detection vs details)
- Field-of-view planning for perimeter coverage
- Environmental conditions (fog, smoke, glare, darkness)
- Integration with visible cameras and event-triggered workflows
- Network, power, and recording requirements
Thermal IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 49 working models of thermal ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | Thermal, 5MP, 2MP |
| IP Rating | IP66, IK10, IP67 |
| Connectivity | Wired |
| Power | PoE, PoE+, PoE++ |
| Storage | microSD |
| Type | Bullet, Thermal, PTZ, Dome, Turret |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most thermal ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
