Outdoor IP Cameras
Sub categories
Showing Results for Outdoor IP Cameras
-
ACTi
SKU: E14
ACTi E14 10MP
- 10MP (3648×2736) sensor resolves facial detail at 15–20 ft in office corridors.
- WDR and DNR handle backlit scenes and low-light zones without extra lighting.
- ONVIF-compliant cube housing mounts to ceiling or wall for fast VMS integration.
$585.00 $432.99 Save $152.01 -
ACTi
SKU: E16
ACTi E16 10MP Fisheye Cube Camera
- 10MP fisheye lens delivers full-room coverage from a single ceiling mount point.
- Single 802.3af PoE cable (13W max) powers the camera—no separate electrical run needed.
- ONVIF Profile S compliance ensures drop-in integration with Milestone, Axis, and other VMS.
$602.00 $445.99 Save $156.01 -
ACTi
SKU: E19
ACTi E19 5MP Cube Camera with Extreme WDR
- 5MP resolution with Extreme WDR handles high-contrast lobbies and backlit scenes.
- Single 802.3af PoE run powers the camera and carries video—no separate PSU needed.
- H.265/H.264 compression and ONVIF/RTSP output integrate with any standard VMS.
$627.00 $463.99 Save $163.01 -
ACTi
SKU: E217
ACTi E217 2MP Box Camera Day/Night Advanced WDR
- 1080p/60fps with Advanced WDR handles backlit windows and bright storefronts cleanly.
- PoE 802.3af under 13W simplifies multi-camera power budgeting on standard switches.
- H.265 compression cuts bitrate 40–60%, reducing storage and bandwidth costs at scale.
$749.00 $553.99 Save $195.01 -
ACTi
SKU: E222
ACTi E222 2MP Box Camera Day/Night WDR PoE
- 1920×1080 resolution supports facial recognition at 8–10 ft without external lighting.
- Advanced WDR handles mixed sunlight and shadow in a single frame, no blown exposures.
- 802.3af PoE draws under 13W — no dedicated electrical circuit required at the camera.
$641.00 $473.99 Save $167.01 -
ACTi
SKU: E33A
ACTi E33A 5MP Bullet Camera Day/Night IR
- 5MP (2560×1920) resolution delivers forensic-grade detail at 20–40 ft identification range.
- Adaptive IR day/night switching removes need for external lighting infrastructure at perimeter zones.
- ONVIF compliance ensures drop-in integration with existing VMS platforms without custom drivers.
$1,187.00 $877.99 Save $309.01 -
ACTi
SKU: E38
ACTi E38 2MP Bullet Camera Day/Night Adaptive IR
- 1080p @ 60 fps with H.264/MJPEG cuts storage load 40–50% vs. 4MP continuous recording.
- Advanced WDR handles high-contrast scenes—entryways, headlights—without manual exposure tuning.
- PoE 802.3af single-cable install; ONVIF compliance ensures ACTi NVR and third-party VMS support.
$451.00 $393.99 Save $57.01 -
ACTi
SKU: E413
ACTi E413 5MP Bullet Camera with 10x Zoom Day/Night
- 5MP (2560×1920) sensor retains facial and plate detail across 40–80 ft sightlines.
- 10x optical zoom eliminates PTZ infrastructure while preserving edge-to-edge sharpness.
- 802.3af PoE consolidates power and video on one cable, simplifying retrofit installs.
$611.00 $533.99 Save $77.01 -
ACTi
SKU: E417
ACTi E417 2MP Zoom Bullet Day / Night Extreme WDR Superior Low
- 10x optical zoom delivers flexible framing without repositioning the camera post-install.
- Extreme WDR handles high-contrast scenes like loading docks and sun-lit facades accurately.
- ONVIF-compliant H.264/H.265 output integrates into mixed-vendor NVR and VMS deployments.
$349.00 $258.99 Save $90.01 -
ACTi
SKU: E43B
ACTi E43B 5MP Bullet Camera with IR & PoE
- 5MP (2592×1920) sensor delivers facial and plate detail beyond standard 1080p HD.
- 802.3af PoE under 13W eliminates separate power runs on any compliant switch or injector.
- Integrated IR and Day/Night mode maintain continuous coverage in total darkness 24/7.
$1,350.00 $998.99 Save $351.01 -
ACTi
SKU: E44A
ACTi E44A 2MP Bullet Camera with IR & Day/Night
- 2MP (1920×1440) sensor supports facial ID at 8–15 ft and plate capture at 25 ft.
- Mechanical IR-cut filter delivers seamless day/night switching with no external illuminators.
- Vari-focal lens and ONVIF compliance simplify post-install alignment and VMS integration.
$489.00 $427.99 Save $61.01 -
ACTi
SKU: E53
ACTi E53 3MP Indoor Dome Camera Fixed PoE
- 3MP (2048×1536) with WDR resolves faces and plates in mixed-light indoor zones.
- Single 802.3af PoE cable (<13W) powers and connects—no separate power run needed.
- Fixed 3.6mm lens and ONVIF Profile S simplify commissioning and VMS integration.
$288.00 $251.99 Save $36.01 -
ACTi
SKU: E54
ACTi E54 5MP Indoor Dome Camera
- 5MP (2560×1920) sensor resolves facial detail at 8–15 m for positive ID review.
- WDR and IR Day/Night switching cover mixed-light and after-hours scenes without added fixtures.
- PoE 802.3af and ONVIF Profile S simplify wiring and integrate with all major VMS platforms.
$923.00 $683.99 Save $239.01 -
ACTi
SKU: E58
ACTi E58 2MP Indoor Dome Camera
- 1920×1080 resolution delivers identification-grade detail at 10–20 ft viewing distances.
- H.265 compression cuts bitrate 40–60% vs H.264, reducing storage and bandwidth costs.
- PoE 802.3af and ONVIF Profile S enable drop-in integration with standard IP networks.
$332.00 $290.99 Save $41.01 -
ACTi
SKU: E616
ACTi E616 5MP Indoor Dome Camera with 4.3x Zoom
- 5MP (2560×1920) resolution captures legible facial detail and SKUs at 10–30 ft.
- 4.3x optical zoom adjusts coverage from wide corridors to narrow aisles without lens swaps.
- 802.3af PoE under 13W integrates into any standard Gigabit PoE switch; no separate PSU needed.
$546.00 $477.99 Save $68.01 -
ACTi
SKU: E69
ACTi E69 2MP Indoor Dome Camera with IR & PoE
- 1920×1080 sensor delivers forensic detail for face ID at entrances and checkout lanes.
- 802.3af PoE under 13W runs on existing switches—no PoE+ upgrade or separate power run needed.
- Varifocal lens and ONVIF support simplify post-install focus adjustment and VMS integration.
$683.00 $504.99 Save $178.01
Outdoor IP Cameras
Outdoor IP cameras are designed for perimeter monitoring and exposed environments where weather resistance, durability, and low-light performance matter. Choose cameras built for reliable operation across temperature swings, precipitation, and challenging lighting conditions.
Plan Your Deployment
- Ingress protection (IP) rating and vandal resistance needs
- Operating temperature range and environmental exposure
- Night performance, IR range, and WDR for backlighting
- Lens selection for distance coverage and identification zones
- PoE power and surge protection planning
Outdoor IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 1080 working models of outdoor ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 8MP, 5MP, Thermal, 6MP, 12MP, 20MP+ |
| IP Rating | IP66, IP67, IK10, IP42, IP52, NEMA 4X, IP68, IPX4 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++, PoE+/12VDC |
| Channels | 6, 20, 4, 2 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most outdoor ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.














