Multi-Sensor IP Cameras
Showing Results for Multi-Sensor IP Cameras
-
ACTi
SKU: Q112-K1
ACTi Q112-K1 5MP Indoor Pinhole Covert Camera
- 5MP resolution delivers high-detail capture in fitting rooms and low-profile spaces.
- ONVIF Profile S ensures drop-in integration with Milestone, Genetec, and ACTi NVRs.
- PoE-powered with built-in mic—single Ethernet run handles power, video, and audio.
$709.00 $619.99 Save $89.01The item has been added -
ACTi
SKU: Q113
ACTi Q113 2MP Indoor L-Shape Pinhole Covert
- 2MP resolution delivers clear indoor video for identification and monitoring.
- L-shaped pinhole form factor enables concealed mounting in tight or confined spaces.
- Covert design supports discreet deployment where low-profile installation is required.
$1,245.00 $921.99 Save $323.01The item has been added -
ACTi
SKU: Q115
ACTi Q115 5MP Indoor L-Shape Pinhole Covert Camera
- 5MP resolution captures facial detail and document-level evidence in indoor scenes.
- L-shaped pinhole form factor fits ceiling voids and wall corners without visible hardware.
- PoE over Ethernet simplifies single-cable deployment with no separate power run needed.
$1,131.00 $836.99 Save $294.01The item has been added -
ACTi
SKU: Q13-K1
ACTi Q13-K1 2MP Outdoor Fisheye Camera
- IP66/IK09-rated housing withstands water jets and physical impact in harsh outdoor sites.
- 182° fisheye FOV replaces multiple cameras for perimeter, parking lot, and courtyard coverage.
- 802.3af PoE and ONVIF support simplify deployment on existing switch infrastructure and VMS platforms.
$780.00 $681.99 Save $98.01The item has been added -
ACTi
SKU: Q14-K1
ACTi Q14-K1 2MP Indoor Pinhole Covert Camera
- 2MP sensor delivers evidence-grade clarity while keeping storage overhead low.
- Single PoE run supplies both power and data—no separate 12V supply or coax needed.
- ONVIF-compliant; integrates with Milestone, Genetec, and any Profile S VMS without proprietary software.
$790.00 $583.99 Save $206.01The item has been added -
ACTi
SKU: Q22
ACTi Q22 2MP Outdoor Micro Box Camera
- 2MP resolution with built-in WDR captures clear detail in high-contrast scenes.
- ONVIF compliance integrates with Milestone, Genetec, and open-architecture VMS platforms.
- Compact box form factor mounts to walls or ceilings in tight or constrained spaces.
$1,386.00 $1,024.99 Save $361.01The item has been added -
ACTi
SKU: Q22-K1
ACTi Q22-K1 2MP Outdoor Micro Box Camera
- 2MP resolution with WDR handles backlit and high-contrast outdoor scenes cleanly.
- PoE connectivity eliminates separate power runs, simplifying deployment on existing switches.
- ONVIF support and built-in mic enable VMS integration with audio verification out of the box.
$1,203.00 $890.99 Save $312.01The item has been added -
ACTi
SKU: Q450
ACTi Q450 8MP Multi-Imager Panoramic Bullet Camera
- Dual 2.8mm lenses deliver 180° HOV at 8MP, cutting camera count on wide perimeters.
- Adaptive IR and WDR handle backlit entries and full darkness with no external lighting.
- PoE-powered at 13W with ONVIF compliance simplifies integration into existing VMS platforms.
$4,192.00 $3,099.99 Save $1,092.01The item has been added -
ACTi
SKU: Q550
ACTi Q550 8MP Outdoor Multi-Imager Turret Camera
- Dual 4MP sensors deliver 180° coverage, replacing two fixed cameras on a single PoE port.
- IP67/IK10-rated metal housing resists direct rain, dust, and deliberate physical impact.
- On-board DLPU runs people/vehicle detection, cutting false alerts before they hit the VMS.
$1,684.00 $1,245.99 Save $438.01The item has been added -
ACTi
SKU: Q75
ACTi Q75 20MP Outdoor Multi-Imager Panoramic Dome
- Four synchronized 20MP sensors deliver a 180° FOV, cutting perimeter camera count.
- IP66/IK10 housing withstands direct rain, dust ingress, and 5 kg vandal impacts.
- H.265 dual-codec streaming cuts bitrate 40–60%, reducing NVR storage overhead.
$7,410.00 $5,480.99 Save $1,929.01The item has been added -
ACTi
SKU: Q84
ACTi Q84 20MP Outdoor Multi-Imager 360° Dome Camera
- Four 5MP sensors deliver 20MP 360° coverage from a single mount, eliminating camera arrays.
- IP67/IK10-rated housing withstands weather and vandal impact for demanding outdoor deployments.
- H.265 compression cuts bitrate up to 50%, reducing storage costs on continuous 24/7 recording.
$7,286.00 $5,388.99 Save $1,897.01The item has been added -
ACTi
SKU: Q93
ACTi Q93 1MP Indoor Mini Dome People Counting Camera
- On-board people counting analytics deliver occupancy metrics at the edge—no extra server needed.
- PoE 802.3af powers the camera over a single Cat cable, eliminating dedicated power runs.
- ONVIF Profile S and fixed 2.55mm f/2.2 lens (108.6° HOV) simplify ceiling or wall integration.
$1,286.00 $1,037.99 Save $248.01The item has been added -
ACTi
SKU: Q94
ACTi Q94 1MP DNR Network Camera
- Built-in people counting analytics stream occupancy data without an external server.
- 802.3af PoE at 6–8W powers the camera from any standard PoE switch port.
- ONVIF-compliant H.264 stream integrates with Milestone, Axis Camera Station, or any RTSP NVR.
$1,232.00 $993.99 Save $238.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02404-001
Axis M5054 Spare Dome for Multi-Sensor Camera - 02404-001
OEM replacement dome for Axis multi-sensor cameras
- Spare dome for Axis multi-sensor cameras (six models)
- OEM-fit drop-in replacement for damaged housings
- Restores image quality on degraded panoramic units
$52.00 $49.99 Save $2.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02757-001
Axis P1518-LE Dual-Sensor 8MP 2MP Outdoor Box Camera - 02757-001
Dual-sensor 8MP/2MP outdoor box camera with Lightfinder 2.0
- 8MP @ 30fps wide-angle + 2MP @ 60fps close-up in one housing
- Lightfinder 2.0 preserves color in low light; Forensic WDR handles contrast
- IP66/67 rated; ARTPEC-8 on-device AI; OptimizedIR for nighttime clarity
In stock · Ships same business day$1,879.00 $1,821.99 Save $57.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02635-001
Axis P3738-PLE 32MP 4K Panoramic Outdoor Dome Camera - 02635-001
360° panoramic dome with 32MP four-sensor array and AI analytics
- Four synchronized 8MP sensors capture full 360° coverage without blind spots
- Lightfinder down to 0.19 lux color + OptimizedIR 850nm for day/night imaging
- Varifocal 3.18–8.12mm remote zoom per quadrant with IP66/IK09 outdoor rating
In stock · Ships same business day$2,159.00 $2,093.99 Save $65.01The item has been added
Multi-Sensor IP Cameras
Multi-sensor IP cameras combine multiple imagers in a single device to deliver wide-area coverage with fewer mounts, cable runs, and switch ports. These cameras are ideal for large open areas where reducing blind spots and simplifying installation are key deployment goals.
Plan Your Deployment
- Coverage design and blind-spot reduction objectives
- Mounting height and viewing angle alignment
- Bandwidth and bitrate planning for multi-imager streams
- Retention impact when multiple streams are recorded
- PoE budget requirements (often higher draw than single cameras)
Multi-Sensor IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 89 working models of multi-sensor ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 8MP, 12MP, 2MP, 20MP+, 6MP, 5MP, 16MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, PoE++, AC/DC, Theta proprietary |
| Channels | 4, 2, 20, 1, 3 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.