Paging & Speakers
Showing Results for Paging & Speakers
-
Bosch
SKU: DCNM-FLSP
Bosch Flush loudspeaker panel - DCNM-FLSP
- Flush loudspeaker panel for Bosch DCNM ceiling or wall install
- Coplanar finish with surface - no protruding speaker enclosure
- Drops into Bosch DCNM conference audio system architecture
$118.00 $75.99 Save $42.01The item has been added -
Bosch
SKU: DCN-FLSP-D
Bosch Flush Loudspeaker Panel Dark - DCN-FLSP-D
- Flush loudspeaker panel in dark finish for Bosch DCN audio rooms
- Angled grille optimizes speech reproduction toward seated audience
- 1.6 x 3.9 x 3.94 in cavity opening fits standard wall plate cutout
$132.00 $88.99 Save $43.01The item has been added -
Code Blue
SKU: 40052
Code Blue 40052 Speaker 3-Pack IA500
PoE speaker 3-pack with IP68 rating for multi-zone audio
- Three units powered by PoE (802.3af)—no additional wiring needed
- IP68 environmental protection for indoor and outdoor installation
- Multi-zone audio deployment across larger facilities or redundant coverage
$100.00 $86.99 Save $13.01The item has been added -
Code Blue
SKU: 40064
Code Blue 40064 4 Ohm Speaker Kit (3-pack)
PoE-powered 4 Ohm speaker kit for Code Blue IA4100 systems
- IP68-rated for outdoor and harsh indoor emergency notification use
- 3-pack of speakers with 802.3af PoE eliminates separate power wiring
- 4 Ohm impedance integrates with Code Blue amplification and control
$240.00 $207.99 Save $32.01The item has been added -
Code Blue
SKU: 40094
Code Blue 40094 8 Ohm Replacement Speaker for LS1000
8 Ohm replacement speaker for Code Blue LS1000 with PoE power
- PoE (802.3af) powered—no auxiliary wiring required for installation
- IP68 rated for indoor and outdoor deployment in any environment
- Direct replacement for LS1000 phone systems with standard mounting
$76.00 $65.99 Save $10.01The item has been added -
Code Blue
SKU: 40410
Code Blue 40410 PAS Replacement Power/Amplifier Kit
PoE-powered PA replacement kit with IP56 outdoor rating
- PoE (802.3af) operation eliminates need for dedicated power runs
- IP56 rating handles wet, dusty, and outdoor environments
- Drop-in replacement for Code Blue CB1S and compatible systems
$1,090.00 $943.99 Save $146.01The item has been added -
Code Blue
SKU: 40471
Code Blue 40471 Audio Paging SRD Solar Kit
- Solar charging eliminates AC infrastructure dependency for remote outdoor paging deployments.
- Supports 12–24V DC input, compatible with standard paging amplifier voltage ranges.
- Weatherproof outdoor-rated construction enables year-round operation in exposed environments.
$3,290.00 $2,848.99 Save $441.01The item has been added -
Code Blue
SKU: 40472
Code Blue 40472 Audio Paging SYL Solar Kit
- Solar power eliminates AC dependency for remote Code Blue paging deployments.
- Accepts 12–24V DC input, fitting standard security system power architectures.
- Drop-in replacement kit maintains paging continuity in existing installations.
$3,290.00 $2,848.99 Save $441.01The item has been added -
Code Blue
SKU: 40473
Code Blue 40473 Audio Paging MBL Solar Kit
- Operates on 12–24V DC input, enabling solar and battery-powered off-grid deployment.
- Designed for mobile base station paging amplifiers in locations without AC power.
- Weather-resistant outdoor construction supports security and emergency comms installs.
$3,290.00 $2,848.99 Save $441.01The item has been added -
Code Blue
SKU: 40475
Code Blue 40475 Audio Paging GBK Solar Kit
- Enables off-grid paging operation where utility power is unavailable.
- Supports 12–24V DC input range for flexible integration with existing infrastructure.
- Designed for outdoor deployment at perimeter stations and remote access points.
$3,290.00 $2,848.99 Save $441.01The item has been added -
Code Blue
SKU: 40479
Code Blue 40479 Audio Paging TOR Solar Kit
- Operates on 24V DC, eliminating AC infrastructure for remote paging deployments.
- Solar-powered design supports off-grid perimeter security and outdoor paging systems.
- Compatible with Code Blue audio paging amplifiers for integrated outdoor installations.
$3,290.00 $2,848.99 Save $441.01The item has been added -
Code Blue
SKU: 41713
Code Blue 41713 Speaker Assy IP2500 - 3pk
- Three-pack format covers small-to-medium facility zones or maintains spares inventory.
- 12–24V DC operation integrates with existing wiring; no infrastructure changes required.
- Native IP2500 compatibility enables drop-in swap or channel expansion without reconfiguration.
$230.00 $199.99 Save $30.01The item has been added -
Code Blue
SKU: 42402
Code Blue 42402 Audio Paging Top CB1 SRD
- Direct CB1 SRD factory-fit replacement — no modification or recalibration required.
- Operates on 12–24V DC input, compatible with standard and low-voltage power infrastructure.
- Modular field-replaceable design minimizes downtime in multi-zone paging deployments.
$4,170.00 $3,575.99 Save $594.01The item has been added -
Code Blue
SKU: 42403
Code Blue 42403 Audio Paging Top CB1 SYL
- Factory-matched for CB1 SYL cabinets, eliminating integration risk on replacement.
- Parallel connectivity supports multi-zone audio routing without signal degradation.
- Field-swappable design minimizes downtime during maintenance or component failure.
$4,170.00 $3,610.99 Save $559.01The item has been added -
Code Blue
SKU: 42404
Code Blue 42404 Audio Paging Top CB1 MBZ
- Direct-fit replacement for CB1 MBZ chassis eliminates cross-platform compatibility risk.
- Operates on 12–24V DC, supporting battery-backed and AC-converted supply circuits.
- Parallel connectivity supports multi-zone paging across large campuses without rewiring.
$4,170.00 $3,610.99 Save $559.01The item has been added -
Code Blue
SKU: 42406
Code Blue 42406 Audio Paging Top CB1 BRG
- Drop-in replacement for CB1 BRG chassis—no reconfiguration or firmware needed.
- Operates across 12–24V DC bus range, fitting multi-voltage facility wiring schemes.
- OEM-spec build preserves original audio fidelity and thermal management tolerances.
$4,170.00 $3,610.99 Save $559.01The item has been added
Paging & Speakers
Paging speakers deliver clear voice communication across commercial facilities, warehouses, campuses, and industrial sites. Select speakers designed for your acoustic environment, coverage area, and system integration requirements to ensure consistent, intelligible announcements.
Plan Your Deployment
- Indoor vs outdoor coverage zones
- Coverage area and sound dispersion requirements
- Ambient noise levels and intelligibility needs
- Integration with paging controllers or IP intercom systems
- Mounting height and placement strategy
Paging & Speakers — Engineering-Grade Intercom & Audio for Commercial Deployments
This category covers 348 working models of paging & speakers sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
SIP-based IP intercoms have largely replaced analog and proprietary platforms. SIP intercoms register with any standard PBX or SIP-compatible VMS, simplifying integration with phone systems and recording infrastructure. Confirm the specific SIP standard supported (RFC 3261, with codecs G.711, G.722, Opus) and any vendor extensions before pairing with a head-end.
Outdoor versus indoor placement drives housing, microphone, and speaker choice. Outdoor intercoms need IP65/IP67 rated housings, wind/echo-canceling microphones, and weather-resistant button faceplates. Indoor units can use lower-cost housings and simpler microphones. For both, audio echo cancellation (AEC) quality is what users notice; cheap intercoms make conversations difficult and drive complaint volume.
Video-enabled intercoms (2N IP Style, Aiphone IX, Axis I8016) integrate camera, two-way audio, and access control in one unit at the door. They eliminate the camera + intercom + reader stack and reduce per-door wiring. The tradeoff is that a single device failure takes out all three functions; design with appropriate redundancy at high-value entrances.
Paging and zone broadcast extend intercom hardware into emergency notification and routine announcements. SIP-based zone paging integrates with the phone system; analog paging via amplifiers and 70V speaker lines remains common in warehouses and large open spaces. Plan zone count, amp wattage, and speaker spacing carefully — under-amped systems are unintelligible at the back of the room.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 5MP, 8MP, Thermal, 20MP+ |
| IP Rating | IP68, IP66, IP54, IP67, IP56 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, AC/DC, PoE++, PoE+ |
| Storage | microSD |
| Type | Speakers/Horns, Accessories, Enclosure, Intercom, Intercom Systems, Speaker, Power Supply, Accessory |
Top Brands in This Category
Frequently Asked Questions
Should I choose a SIP intercom or a proprietary system?
SIP is the safe choice for new deployments — it integrates with standard PBXs, SIP-compatible VMS, and modern unified-communications platforms. Proprietary systems (some legacy Aiphone, Comelit, Axis) tie you to specific head-ends. SIP also future-proofs the investment as PBX choices evolve. Choose proprietary only if you've already committed to a specific platform with strong feature differentiation.
Can I integrate the intercom with my access control?
Yes — most modern IP intercoms expose Wiegand or OSDP outputs to access control panels, or REST APIs for direct integration. Video intercoms (2N, Aiphone IX, Axis I8016) often integrate natively with access control platforms. Confirm specific integrations against the controller and head-end you've chosen — generic ONVIF support isn't sufficient for access-control event handoff.
How many zones do I need for paging?
Zone count follows the building floor plan and operational needs. Typical commercial buildings run 4-8 zones — one per major area or floor. Distribution warehouses and schools commonly run 16-32 zones to support targeted communication. Over-zoning adds amp cost and management complexity; under-zoning forces blanket announcements that aren't useful operationally. Map zones to actual decisions before building the system.
What speaker wattage do I need for outdoor paging?
Outdoor paging requires higher wattage per area than indoor — wind, distance, and ambient noise consume sound pressure. Plan for 15-30W per speaker on a 70V line at 50-100 foot spacing for general announcements. For emergency notification with intelligibility requirements (UL 2572), use horn-type speakers and confirm the speaker layout meets local code's sound-level-at-listening-position requirements.
Do video intercoms work in low light?
Most modern video intercoms (Aiphone IX, 2N IP Style, Axis I8016) include integrated white-light or IR illumination for low-light operation. Confirm the minimum illumination figure and the IR range. For entrances facing direct sun during day and full darkness at night, look for HDR-capable intercoms; cheap units wash out in direct sunlight and lose detail in shadows where faces actually are.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.