Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Add to Cart The item has been addedHP Inc
SKU: 4N004AA
HP Inc 4N004AA HP Z2 Mini Arm/wall Vesa Mount Solution
In stock · Ships same business day$99.00 $98.99 Save $0.01The item has been added -
HP Inc
SKU: 4N006AA
HP Inc 4N006AA HP Z2 Mini Vertical Stand
In stock · Ships same business day$34.00 $33.99 Save $0.01 -
Add to Cart The item has been addedHP Inc
SKU: 762T5AA
HP Inc 762T5AA HP B200 PC Mounting Bracket
In stock · Ships same business day$64.00 $63.99 Save $0.01The item has been added -
i-PRO
SKU: A-46-PM
i-PRO A-46-PM Pendant Mount for ADVIDIA Cameras
- IK10-rated housing withstands 20J impact, protecting installs in high-traffic areas.
- Pendant design clears ceiling obstructions for clean sightlines in corridors and atriums.
- Rated −30°C to 60°C, supporting reliable deployment across indoor and covered outdoor sites.
$70.00 $69.99 Save $0.01The item has been added -
i-PRO
SKU: PACA2B
i-PRO Corner Mount Bracket Beige - PACA2B
- Corner-mount design eliminates custom fabrication for constrained wall installations.
- Pre-drilled holes reduce field labor time during i-PRO camera deployments.
- Beige powder-coat finish integrates discreetly into commercial interior environments.
$118.00 $117.99 Save $0.01The item has been added -
i-PRO
SKU: IPS-BWC-MNT-POUCH
i-PRO IPS-BWC-MNT-POUCH Body Camera Mount Kit Pouch
- IP67-rated pouch withstands submersion to 1 m for 30 min, per IEC 60529.
- MIL-STD-810H compliance ensures reliable retention through patrol and tactical handling.
- Klick Fast™ interface integrates with ICV4000 for unbroken chain-of-custody workflows.
$5.00 $4.99 Save $0.01The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-JB
i-PRO M-JB Round Junction Box for Fixed Dome Cameras
IP66 round junction box for ceiling-mount fixed dome cameras
- IP66 weather-sealed housing protects RJ45 connectors and splices from rain and dust
- Supports CAT5e and CAT6 cable with weatherproof glands to prevent water ingress
- UV-stabilized aluminum construction for outdoor and semi-exposed ceiling installations
In stock · Ships same business day$37.10 $36.99 Save $0.11The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-JB-MINI
i-PRO M-JB-MINI Round Junction Box IP66 Weatherproof
IP66 round junction box for ceiling/wall camera mounts, indoor/outdoor
- IP66 weatherproof rating seals connectors and cable loops from water and dust
- Flat-top design nests under camera housing without forcing sharp CAT5e/CAT6 bends
- Multiple knockouts accept conduit from any direction without custom modifications
In stock · Ships same business day$28.76 $27.99 Save $0.77The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-JB-MINI-B
i-PRO M-JB-MINI-B Round Junction Box for Bullet Cameras
Compact round junction box for i-PRO M-49-V and M-89-F-L bullets
- 104.4mm × 54.5mm footprint fits ceiling or wall with minimal visual impact
- Aluminum alloy construction weighs 0.79 lbs, needs no extra reinforcement
- Model-specific design for M-49-V and M-89-F-L eliminates adapters and fitment
In stock · Ships same business day$42.56 $41.99 Save $0.57The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-JB-T
i-PRO M-JB-T Round Junction Box for Dome Cameras
Compact 126mm aluminum junction box for i-PRO dome cameras
- Low-profile 38.5mm height fits drop ceilings and tight soffits
- Lightweight 0.24kg aluminum construction installs on drywall without reinforcement
- Compatible with M-46-V, M-44-V, M-24-V-T, M-26-V dome series
In stock · Ships same business day$30.46 $29.99 Save $0.47The item has been added -
i-PRO
SKU: M-PARAPET
i-PRO M-PARAPET PTZ Parapet Mount M-200-P
- Gooseneck geometry delivers 879mm horizontal clearance for unobstructed 360° PTZ pan.
- Aluminum alloy rack-style bracket weighs 4.3 kg — plan anchor loads accordingly.
- Positions PTZ dome 831mm vertically off the parapet surface for full perimeter coverage.
$233.10 $232.99 Save $0.11The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-PENDANT
i-PRO M-PENDANT NPT 3/4 Pendant Mount 7.75 Inch
Ceiling pendant mount with 7.75" NPT 3/4 connection for i-PRO cameras
- 7.75-inch extension positions cameras below ceiling obstructions
- Aluminum alloy construction at 0.55 lbs with corrosion-resistant finish
- Internal cable routing for power and network connections
In stock · Ships same business day$27.28 $26.99 Save $0.29The item has been added -
i-PRO
SKU: M-PENDANT-EX
i-PRO M-PENDANT-EX Pendant Extension Mount
Aluminum pendant extension for i-PRO PTZ cameras in high-ceiling spaces
- Internal cable routing protects power and network lines from damage
- Stackable aluminum alloy construction at 0.35 lbs with corrosion-resistant finish
- Threaded design threads onto standard i-PRO pendant mounts for secure installation
In stock · Ships same business day$18.76 $17.99 Save $0.77 -
i-PRO
SKU: M-PM-B-V2
i-PRO M-PM-B-V2 Pole Mount Bracket
Die-cast aluminum pole/wall mount for i-PRO dome and bullet cameras
- IP66 weather and dust protection rated for outdoor installations
- Lightweight 0.75 lbs design with UV and corrosion-resistant black finish
- Compatible with select i-PRO dome and bullet camera models
$34.52 $33.99 Save $0.53The item has been added -
Add to Cart The item has been addedi-PRO
SKU: M-PTZ-PM
i-PRO M-PTZ-PM Pole Mount Adapter
Pole mount adapter for PTZ domes; die-cast aluminum, round/square posts
- Die-cast aluminum with powder coating resists corrosion and UV degradation
- Optimal lens clearance prevents IR reflection during night operation
- Even weight distribution eliminates drift on vertical pole installations
In stock · Ships same business day$51.16 $50.99 Save $0.17The item has been added -
i-PRO
SKU: M-WM-JB-MINI-V2
i-PRO M-WM-JB-MINI-V2 Wall Mount with Junction Box
Wall mount with integrated junction box for i-PRO dome cameras
- Die-cast aluminum with powder-coat white finish resists corrosion outdoors
- Built-in junction box consolidates power and signal connections at mount
- Anchors to concrete, masonry, steel, and wood-frame surfaces without adapters
$83.34 $82.99 Save $0.35The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.