Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Hanwha
SKU: FC09-008186A
Hanwha FC09-008186A Ceiling Bracket for XNO6020R
Ceiling bracket for XNO6020R with integrated hardware for drop/solid ceilings
- Ceiling bracket for the Hanwha XNO6020R camera
- Purpose-built indoor ceiling mount platform
- 7.14 lb white bracket for secure overhead positioning
$35.09 $34.99 Save $0.10The item has been added -
Hanwha
SKU: FC39-007065A
Hanwha FC39-007065A Stainless Steel Mount Plate
Stainless steel mount plate for Hanwha QNV-C8083R outdoor installations
- SUS stainless steel mount plate for the Hanwha QNV-C8083R
- Wall and ceiling install flexibility for outdoor mount
- Corrosion-resistant build for moisture-prone deployments
$27.99The item has been added -
Add to Cart The item has been addedHanwha
SKU: HNW-SS-800
Hanwha HNW-SS-800 Ceiling Mounted Microphone
Ceiling microphone with 12-foot omnidirectional pickup for synchronized audio
- 60dB signal-to-noise ratio captures clear dialogue without hum or distortion
- Line-level output at 2.2kΩ impedance connects directly to IP cameras and NVRs
- Recessed 3 1/8" mount fits standard ceiling knockouts with minimal visibility
$330.00 $214.99 Save $115.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: HNW-SS-806
Hanwha HNW-SS-806 Line Level Wall Microphone
Flush-mount line-level mic for secure facilities with 12-ft omni coverage
- Line-level wall microphone in 12-gauge stainless steel
- Anti-ligature design for correctional and detention use
- Operates -25C to 70C for harsh environment mounting
In stock · Ships same business day$350.00 $227.99 Save $122.01The item has been added -
Hanwha
SKU: HT-E-BFP00CL
Hanwha HT-E-BFP00CL Pole Adaptor for Explosion-Proof Cameras
Stainless steel pole mount for Hanwha explosion-proof cameras
- Stainless steel construction resists corrosion in hazardous environments
- Pole adaptor supports flexible installation on varying diameter poles
- Purpose-built for ATEX-regulated indoor and outdoor industrial sites
$1,550.00 $1,009.99 Save $540.01The item has been added -
Hanwha
SKU: HT-E-BFP00SW
Hanwha HT-E-BFP00SW Explosion Proof Camera Bracket
Stainless steel top mount bracket for explosion-proof camera installation
- Stainless steel construction resists corrosion in hazardous environments
- Top mounting design enables overhead installation with precise angle positioning
- Compatible with Hanwha and third-party explosion-proof camera models
$775.00 $504.99 Save $270.01The item has been added -
Hanwha
SKU: HT-E-BPW6800
Hanwha HT-E-BPW6800 PTZ Wall Mount
Stainless steel wall mount for TNP-xxx explosion-proof PTZ cameras
- Electro-polished stainless steel construction resists corrosion in hazardous environments
- Precision-fitted for TNP-xxx series with full pan-tilt-zoom positioning capability
- Rated for Class I/II hazardous locations in oil, gas, chemical, and mining sites
$1,475.00 $960.99 Save $514.01The item has been added -
Hanwha
SKU: HT-F1XX-WM
Hanwha HT-F1XX-WM Wall Mount for Explosion Proof
316L stainless steel wall mount for explosion-proof cameras
- 316L stainless steel resists corrosion in hazardous, outdoor, and coastal environments
- Compatible with TNO-X6072EPT1-Z, TNO-X8072EPT1-Z, TNO-X6322EPT1-Z models
- Wall-mounted design for secure, stable positioning indoors and outdoors
$1,450.00 $1,086.99 Save $363.01The item has been added -
Hanwha
SKU: HT-SD-CM
Hanwha HT-SD-CM Corner Mount Adapter
Corner mount adapter for hazardous-area surveillance in stainless steel
- 316L stainless steel construction resists corrosion indoors and outdoors
- Mounts to HT-SD-WM and HT-F1XX-WM wall mount systems for corner placement
- Rated for Class I Division 1/2 hazardous locations and explosive atmospheres
$1,255.00 $817.99 Save $437.01The item has been added -
Hanwha
SKU: HT-SD-WM
Hanwha HT-SD-WM Wall Mount for Explosion-Proof Cameras
316L stainless steel wall mount for explosion-proof camera installations
- 316L stainless steel resists salt spray and chemical vapor corrosion
- Upright or inverted mounting orientation fits ceiling and wall deployments
- Compatible with TNP-X6322EPT3-Z and TNP-Q6232EPT3-Z explosion-proof cameras
$2,790.00 $1,817.99 Save $972.01The item has been added -
Hanwha
SKU: HT-SPMA-SD
Hanwha HT-SPMA-SD Pole Mount for Explosion Proof
Pole mount for explosion-proof cameras up to 6-inch diameter
- Mounts HT-SD-WM and HT-F1XX-WM cameras on standard poles
- Supports poles up to 6 inches in diameter for flexible positioning
- White construction designed for hazardous location installations
$2,260.00 $1,472.99 Save $787.01The item has been added -
Hanwha
SKU: HT_SD-CM
Hanwha HT_SD-CM Corner Mount (L)
- Hanwha 2MP corner mount camera with IP66 weather sealing
- Powder-coated aluminum for coastal and spray-down environments
- PoE 802.3af with H.265 compression and WDR imaging
$1,255.00 $817.99 Save $437.01The item has been added -
Hanwha
SKU: FC39-005085A
Hanwha Mount-Plate-Xnv-6081z;adc12 - FC39-005085A
- ADC12 aluminum die-cast mounting plate for XNV-6081Z
- Weather-resistant outdoor finish for wall and pole installs
- Stable platform for PTZ dome operational vibration
$43.20 $42.99 Save $0.21The item has been added -
Hanwha
SKU: FC39-004792B
Hanwha MOUNT-PLATE_PNM-9000VQ_PO - FC39-004792B
$114.99The item has been added -
Hanwha
SKU: FC39-005815B
Hanwha MOUNT-PLATE_PNM-9084RQZ_SW;ADC12
$97.49 $96.99 Save $0.50The item has been added -
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.