Code Blue

SKU: 41089

Code Blue 41089 Curb Mount GBK NEMA Enclosure

• NEMA-rated weatherproof housing protects components from rain, dust, and UV outdoors.
• Curb mount design cuts installation footprint and simplifies cable routing on-site.
• 24V DC power compatibility integrates with standard paging amplifier infrastructure.

Code Blue

SKU: 41594

Code Blue 41594 Trim Ring IP2501 SS

• 304/316 stainless steel resists salt spray and moisture for 5+ year outdoor lifecycles.
• Engineered fit for IP2501 housings aligns with standard 4- or 6-hole bracket patterns.
• Integrated retention tabs hold housing within ±2mm tolerance, minimizing vibration drift.

Code Blue

SKU: 41595

Code Blue 41595 Trim Ring IP5000/IA4100 SS

• Stainless steel construction resists corrosion in humid and salt-air outdoor environments.
• Direct fitment for IP5000 and IA4100 series — no modification or adapter plates required.
• Five-minute swap makes this a practical spare for service calls and unit refresh cycles.

Code Blue

SKU: 40038

Code Blue Centry Trim Ring Field Kit-GAI - 40038

• Finishes Centry® speakerphone wall or pole installations with a clean trim interface.
• Field kit format enables on-site trim ring replacement without returning the unit.
• Verify Centry model revision against Code Blue accessories catalog before ordering.

Code Blue

SKU: 41637

Code Blue Flushmnt IP1501 Trim Ring Kit - 41637

• Flush-mount trim ring kit for Code Blue IP1501 VoIP speakerphone
• Seals install gap between recessed phone and finished wall surface
• Drops onto IP1501 wall cutout - no custom trim cutting needed

Code Blue

SKU: SLNF16170-01

Code Blue SLNF16170-01 CB 1-s with AED Housing

IP68 AED housing for outdoor & indoor emergency response, PoE powered

• IP68 dust and water immersion protection rated for all-weather deployment
• PoE (802.3af) power eliminates need for dedicated electrical runs
• Mounts indoors or outdoors for flexible emergency access placement

Code Blue

SKU: SLNF16170-03

Code Blue SLNF16170-03 CB 1-s AED Housing Lime Green

IP68 PoE-powered AED housing for outdoor & indoor PAD deployment

• IP68 dust and water immersion protection for reliable outdoor mounting
• PoE (802.3af) power eliminates dedicated electrical lines during install
• Lime green color maximizes visibility for emergency responders in high-traffic areas

Code Blue

SKU: 41596

Code Blue Trim Ring IP2501/IA501 BS CC - 41596

• Direct-fit bezel for IP2501 and IA501 speakerphones; no adapter plates required.
• Single SKU supports wall, pole, recessed, and rack installations without modification.
• Passive mechanical component; no wiring or network connections needed to install.

Code Blue

SKU: 41597

Code Blue Trim Ring IP5000/IA4100 BS CC - 41597

• Fits IP5000 VoIP and IA4100 analog faceplates; verify bolt pattern before ordering.
• Supports both surface-mount and recessed wall installations with no extra hardware.
• Conceals installation gaps and fastener heads for a clean, finished deployment.

Comelit

SKU: 4793MA

Comelit 4793MA Aluminium Faceplate for Quadra W/Buttons

Aluminium faceplate replacement for Comelit Quadra intercom systems

• Aluminium housing resists minor impacts in lobby and entrance installations.
• Integrates mechanical buttons directly, ensuring clean contact with Quadra PCB.
• Wall-mount design enables straightforward swap on existing Quadra panel assemblies.

Comelit

SKU: UT9171

Comelit UT9171 Surface-Mounted Wall Housing for Ultra Series

Surface-mount wall housing for Comelit Ultra Series with PoE+ power

• PoE+ (802.3at) support combines data and power on one cable, cutting retrofit labor.
• Surface-mount form factor installs directly on any flat wall without in-wall rough-in.
• Sized at 4.33" × 4.21" × 1.38", it fits tight corridors while housing Ultra Series units.

Comelit

SKU: UT9171B

Comelit UT9171B Surface-Mounted Thermal Camera Housing

Surface-mount thermal housing with PoE+ power, no recessed wiring

• PoE+ (802.3at) power delivery eliminates separate power runs at each camera drop.
• Surface-mount form factor installs on drywall, brick, or concrete with no cutouts.
• Compact 4.33" × 4.21" × 1.38" footprint fits tight wall spaces in retrofit jobs.

Comelit

SKU: UT9172

Comelit UT9172 Surface-Mounted Wall Housing for 2MP Ultra

Surface-mounted 2MP housing for Comelit Ultra cameras, PoE+ powered

• PoE+ (802.3at) draws power from network, no 12VDC injector at wall
• Surface-mount wall housing for 2MP (1920x1080) Ultra entrance panels
• Compact 110 x 198 x 35 mm profile for tight retrofit wall mounting

Comelit

SKU: UT9172B

Comelit UT9172B Surface-Mounted Housing 2 Ultra Modules

Surface-mounted thermal housing for 2 ultra modules with PoE+ power

• At 35 mm deep, installs over existing conduit runs with minimal wall impact.
• Screw-free module retention speeds commissioning and prevents over-torqued tabs.
• Die-cast aluminum frame with cataphoresis treatment resists corrosion and UV wear.

Comelit

SKU: UT9173

Comelit UT9173 Surface-Mounted Wall Housing for Ultra Series

Surface-mount housing for three Comelit Ultra intercom units

• Consolidates three Ultra-series intercom units into one 110×289mm surface-mount frame.
• Each unit draws PoE+ (802.3at) power independently—no separate power runs required.
• Simplebus 2 audio/video with integrated power simplifies single-cable wiring per unit.

Comelit

SKU: UT9173B

Comelit UT9173B Surface-Mounted Housing 3 Ultra Modules

Three thermal modules in one surface-mount housing, powered by PoE+

• Consolidates three ultra thermal modules into one wall-mount, cutting wall penetrations.
• Single PoE+ (802.3at) feed powers all three modules, eliminating local power supplies.
• Compact 4.33" × 11.38" × 1.38" surface-mount profile deploys without structural modification.